User's Manual Part 2
311
i-αppli/i-Widget
You can set an i-αppli program for the Stand-by display. Once set, the
i-αppli Stand-by display automatically appears each time you show the
Stand-by display.
1
Software listi()Software setting
Stand-by setON or OFFl()
“ ” is displayed for the software program set as the Stand-by display.
“ ” or “ ” is displayed while an i-αppli Stand-by display is running.
From the i-αppli Stand-by display, press <.
“ ” or “ ” changes to a blinking “ ” or “ ” and then you can operate the i-αppli
program as a normal one.
To return to the i-αppli Stand-by display, press and hold r for at least one second or
press h; then select “Ended”. To release the i-αppli Stand-by display, select
“Terminated”, and select “YES”.
<i-αppli Stand-by Display>
Operating i-αppli Stand-by Display
Software Setting (Stand-by Set)
To operate an i-αppli program as a normal i-αppli program
when an i-αppli Stand-by display is running
Information
If you turn off the FOMA terminal while the i-αppli Stand-by display is running, the
confirmation display appears asking whether to start the i-αppli program when you
turn on the power again.
You can set only one software program for the i-αppli Stand-by display.
Some i-αppli programs cannot be set for the Stand-by display.
With some software programs set as the i-αppli Stand-by display, you can press a key
to go from the normal i-αppli status to the i-αppli Stand-by display status. However,
you cannot return to the i-αppli Stand-by display if another menu function is running.
Note that you might not be able to receive timely information if you have set “Stand-by
net” of “Software setting” to “OFF”.
You cannot use the Web To function and the Phone To/AV Phone To function from
the i-αppli Stand-by display.
If the software program which connects to the network is set for the i-αppli Stand-by
display, it might not operate successfully because of radio wave conditions or other
factors.
You can set whether to permit communication for when the i-αppli
Stand-by display is running.
1
Software listi()Software setting
Stand-by netON or OFFl()
You can temporarily end the running i-αppli Stand-by display. Also, you
can release the i-αppli Stand-by display.
1
mSet./ServiceDisplayDisplay setting
Stand-by displayEnd iαppli display
End or Terminate
When you select “Terminate”, select “YES”.
When you show the Stand-by display while a menu function is operating, the image
set for “Stand-by display” of “Display setting” is displayed, even when the i-αppli
Stand-by display is set.
When communicating frequency is extremely high in a certain period of time while an
i-αppli program is running as the i-αppli Stand-by display, the confirmation display
appears. When you press -r, the confirmation display appears asking whether to
continue communication.
If you set Lock All or Personal Data Lock when the i-αppli Stand-by display is shown,
the i-αppli Stand-by display will end. If you set Lock All, the image set for “Stand-by
display” of “Display setting” will be displayed and if you set Personal Data Lock, the
default Stand-by display will be displayed. The i-αppli Stand-by display will return
when you release each lock.
Software Setting (Stand-by Net)
Information
End Stand-by Display