User's Manual Part 2
211
i-mode/i-motion/i-Channel/i-concier
2
Enter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the
code is not entered within 60 seconds, the connection is
cut off as an error entry.
See page 126 for PIN2 code.
3
DownloadContinue
If you do not download the user certificate immediately, select “Menu”. From the
confirmation display asking whether to close the SSL page, select “YES”to
return to the site display for the FirstPass Center.
You can connect to FirstPass sites with your user certificate.
1
Call up a FirstPass siteSelect an itemYES
2
Enter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the code is not entered within 60
seconds, the connection is cut off as an error entry.
See page 126 for PIN2 code.
Information
Before downloading a new or an updated certificate, be sure to request the user
certificate to be issued. User certificates cannot be downloaded until the request for
issue has been made.
Access Sites with User Certificate
Information
If you try to connect to the FirstPass site without the user certificate or when its
available period is expired, the confirmation display appears asking whether to
continue connecting to the site. Select “NO”to return to the previous page. Download
or update the user certificate from the FirstPass Center site and then access the site
again.
The packet communication fee for accessing the FirstPass site is included in
Pake-Houdai, Pake-Houdai Full or Pake-Houdai Double.
You can revoke the downloaded user certificate.
1
Site display of the FirstPass CenterOther settings
Revoke your certificateYESEnter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the code is not entered within 60
seconds, the connection is cut off as an error entry.
See page 126 for PIN2 code.
2
ContinueContinueContinue
You can set the host for downloading the user certificate.
1
iOperate certificateCertificate host
Highlight <Not recorded> and press l().
If you select a stored host, the setting is changed to that host.
To delete the stored host, press i( ), select “Delete”, enter your
Terminal Security Code, and then select “YES”.
Request Revocation of User Certificate
Information
To use FirstPass after revoking a certificate, you need to apply again for your user
certificate to be issued and then download it.
See page 209 for how to view the download user certificate.
<Certificate Host>
Changing Hosts for Certificate Issue
※Normally, you do not need to change this setting.