User's Manual Part 2
246
Camera
Common replay mode
[Movie Mode only]
You can set a shooting size appropriate for attaching to
i-mode mail.
YES
Image Size is set to “QCIF”, File Size Setting is set to “Mail
restrict’n (S)”, and Image Quality (Movie Mode) is set to
“Normal”.
Icon You can set whether to display icons.
ON or OFF
Memory info You can display the used memory space (estimate)/number of
stored items.
Information
<Inside camera/Outside camera>
When “Image size” is set to larger than “Stand-by (480 x 854)”, and you switch to the
inside camera, the camera starts up in “VGA (480 x 640)”.
<File size setting>
When “File size setting” is set to “Long time”, “Store in” is set to “microSD”.
<Photo mode>
Even if you change the setting of “Brightness”, “White balance”, “Color mode set”, or
“Focus”, the setting appropriate for each “Photo mode” applies when you change
“Photo mode”
Note that the image may blur in Night Mode because the exposure takes a longer
time.
<Img. stabilizer>
Image Stabilizer function is only for decreasing the degree of camera shake, so its
effect differs depending on the subject or condition.
Image Stabilizer might not work effectively in the following cases:
・When the camera shakes to a great extent
・When zooming is in use
・When shooting moving subjects
When “Photo mode” of “Camera settings” is set to “Sports”, “Night mode”, or “Pet” in
Photo Mode, “Img. stabilizer” becomes invalid.
Residual images might remain in the area where the subject is moving, or noise might
be found in overall area. In that case, set this function to “OFF”.
In Movie Mode, the shooting range varies depending on the “Auto” or “OFF” setting
because peripheral pixels are used for the processing by Image Stabilizer.
When this function is activated in Photo Mode, the processing after shooting might be
about two seconds longer due to the processing by Image Stabilizer.
You cannot use Image Stabilizer for the inside camera.
<Shoot with frame>
When “Image size” is set to larger than “1M (960 x 1280)”, you cannot shoot with a
frame.
If you shoot a still image with a frame using the inside camera and save it, the frame is
also horizontally reversed when the still image is automatically reversed as a correct
image.
You cannot save the still image shot with a frame as the mirrored image.
<Flicker correction>
If you set to “Auto”, it may take a while to automatically adjust the image quality. In this
case, switch to Mode 1 or Mode 2 according to the power frequency provided in the
shooting location.
<Storage setting>
See “Select storage” for how to set a storage location on the microSD card.
If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and
“Storage setting” cannot be operated.
When “Auto save set” is set to “ON”, the image is saved to the latest folder if “Select
storage” is not set or the folder set as a destination folder is deleted.
<High sensitiv.>
When you set “High sensitiv.” to “ON” while setting “Image size” to larger than “2M
(1200 x 1600)”, “Image size” is changed to “1M (960 x 1280)”. In this case, if you
switch “High sensitiv.” to “OFF” without changing the setting of “Image size”, it returns
to the former setting before switching “High sensitiv.” to “ON”.
You cannot set “Image size” to larger than “2M (1200 x 1600)” while setting this
function to “ON”.
<Cont. shooting set.>
You cannot set “Continuous mode” to “Auto bracket” for the inside camera.
When switch to the inside camera while setting to “Auto bracket”, “Continuous mode”
is set to “Auto”.
The number of shots that can be set differs depending on the image size. The number
of shots that can be set is as follows:
VGA (480 x 640): 4
QVGA (240 x 320): 5 through 10
QCIF (144 x 176): 5 through 20
Sub-QCIF (96 x 128): 5 through 20
Information