User's Manual Part 2
248
Camera
You can use the outside camera to scan JAN codes and QR codes and
store them as data files. Further, after downloading a compatible i-αppli
program, you can scan the code of Code 128 and store it as a data file.
From the scanned data, you can make calls, compose i-mode mail
messages, and access Internet web pages, and so on.
■When scanning with Bar Code Reader
Take the character strings as large as
possible within the guide frame.
Autofocus works when you scan a
code about 10 cm or more away from
it. When you scan a code in the
out-of-focus state, the recognition
rate lowers.
Scan so that the camera is in parallel
with the code.
■JAN Code
JAN Code is a bar code that denotes numerals with
the vertical bars of a different width.
You can scan 8-digit (JAN8) and 13-digit (JAN13)
JAN codes.
“4942857112597” is displayed when you scan this bar
code with the FOMA terminal.
■QR Code
QR Code is one of the 2-dimensional codes that denotes data in
the vertical and horizontal directions.
Kanji, katakana, alphanumeric characters, and pictographs are
displayed when you scan it. Some QR codes have image or
melody information.
“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when
you scan this QR code with the FOMA terminal.
<Bar Code Reader>
Using Bar Code Reader
Scanning Code display
Guide frame
■Code 128
Code 128 is a bar code that denotes ASCII
code 128 characters (numerals, alphabets,
symbols and others) with the vertical bars
of a different width.
“NTT DOCOMO” is displayed when you scan this code by downloading a compatible
i-αppli program.
You can store up to 5 scanned codes.
You can scan up to 16 divided QR codes.
1
mLifeKitBar code readerScan code
The Bar Code Reader menu is displayed.
You can paste the Bar Code Reader menu to the desktop. (See page 31)
2
Fit a code to be scanned to the guide frame and press
Xo.
When the focus is locked, a confirmation tone sounds and the cross mark becomes
green.
Press i( ) and select “Brightness”; then you can adjust brightness to -3
(dark) through +3 (bright).
Press Co to show the reduced display, and press Vo to return to the former
display.
Scan a Code
At Bar Code Reader
start-up
Brightness: ±0
Zoom: Magnified view