User's Manual Part 2

253
1Seg
<Example> When you watch a 1Seg program for the first time
Store the channel list for the area you use. (See page 254)
Activate 1Seg. (See page 255)
■Battery level
If you try to start 1Seg or 1Seg starts automatically by TV Timer when the battery is low,
the battery alert tone sounds, and the confirmation display appears asking whether to
start it. Also, when the battery becomes low while you are watching or recording a 1Seg
program, the battery alert tone sounds, and the confirmation display appears asking
whether to end 1Seg. The battery alert tone sounds regardless of the setting of “Keypad
sound”.
When you do nothing from the confirmation display for about one minute, 1Seg
automatically terminates.
While “Rec. when low battery” is set to “ON”, the confirmation display does not appear
during recording. (See page 269)
If the battery level becomes low during recording and recording ends, the video
recorded up to that point is automatically saved.
During Multitask, the battery alert tone sounds but the confirmation display does not
appear. Switch to the viewer display and then operate.
Before Using 1Seg
How to Watch a 1Seg Program
Channel Setting
Activating 1Seg
1
2
■When a call etc. comes in while you are watching or recording a 1Seg program
When an event shown below occurs while watching or recording a 1Seg program, the
video and audio are suspended, and each function works. Recording is not suspended.
After you finish each function, you can resume watching a 1Seg program. See page 259
for receiving i-mode mail messages, SMS messages or Messages R/F.
Incoming voice call, videophone call, PushTalk call
(To start recording when a call is received, refer to “Rec. program when call”.)
Notification of Alarm, Schedule, ToDo, or TV Timer
(when “Alarm setting” is set to “Alarm preferred”)
Notification of Timer Recording
(When the start date/time comes, the FOMA terminal works according to the setting of
“Priority”.)
Information
1Seg is not available while “USB mode setting” is set to “microSD mode” or “MTP
mode” and the FOMA terminal is connected to a personal computer.
1Seg might automatically start when you end a call by closing the FOMA terminal
during a call. In such a case, be careful not to use the FOMA terminal close to your
ear because audio is output at the sound volume for 1Seg.
The life of battery pack may shorten if you watch 1Seg programs for a long time
during charging.
1Seg is not available overseas.
■Important
Note that we cannot be held responsible for loss or changes of the saved contents due
to a malfunction, repair, or other mishandling of the FOMA terminal. Furthermore, we
cannot move the saved information (such as still images, TV links, or information
saved to the broadcasting storage area) when you change your FOMA terminal or
have it repaired.