User's Manual Part 2
254
1Seg
To watch 1Seg programs, you need to execute Channel Setting and to
select a channel list in advance. You can store up to 10 channel lists.
The broadcasting stations you can receive differ depending on the local area. If you
store a channel list of the area for traveling or business trip, you can watch programs in
the area just by selecting the channel list.
The remote-control numbers you use with channel selections are previously set for
respective broadcasting stations.
You cannot execute Channel Setting during recording of a 1Seg program.
The broadcasting stations you can currently watch are automatically
searched and stored in a channel list.
You need to set this function in the terrestrial digital TV broadcasting service area.
1
m1SegChannel settingAuto channel setting
YES
Searching takes place.
From the Channel list display, press i( ), select “Channel setting” →
“Auto channel set.”.
From the viewer display, press i( ), select “Disp.Ch./operation” →
“Channel setting” → “Auto channel set.”.
2
YESEnter a title.
You can enter up to 11 full-pitch/22 half-pitch characters.
When you press Oo( ) without entering a title, the title name takes the
name of “YYYY/MM/DD hh:mm”. (Y: year, M: month, D: date, h: hour, m: minute)
To cancel searching midway, press l() or r; then select “YES”. You
can store the searched broadcasting stations in a channel list.
<Channel Setting>
Setting Channels
Auto Channel Setting
You can store the broadcasting stations set by prefecture to a channel
list.
1
m1SegChannel settingSelect area
Select an areaSelect a prefectureYES
From the Channel list display, press i( ), select “Channel setting” →
“Select area”.
From the viewer display, press i( ), select “Disp.Ch./operation” →
“Channel setting” → “Select area”.
Information
When the multiple broadcasting stations which have the same remote-control number
are retrieved, the message to the effect that the remote-control number is doubled
appears. Select “OK” and select your area from the Local Area Selection display. The
channels in the area you select are preferentially assigned to remote-control numbers
1 to 12, and channels in the area you do not select are assigned to remote-control
numbers 13 onward.
The time to search channels requires for about 30 to 50 seconds. However, it differs
depending on the number of broadcasting stations or airwave conditions, and might
exceed 100 seconds.
Select Area
Information
Depending on the area, you may not be able to correctly store the broadcasting
stations by “Select area”. In that case, search for the broadcasting stations by “Auto
channel setting”.