User's Manual Part 2

257
1Seg
※1 In Data Broadcasting Mode, you cannot operate.
※2 You cannot operate from the horizontal display in Normal Style.
※ 3 You cannot operate in Horizontal Open Style.
When you close the FOMA terminal, the vertical display returns. In Horizontal Open
Style, the horizontal display automatically appears; the vertical display does not appear.
※4 You can operate program information (outline) from the horizontal display.
Program info l(for at least one second)
Program info
(outline)
d
Switch display d while displaying program information (outline)
Each time of pressing from the horizontal display switches the
setting of “Icon” and “Caption posit. in w-scr”.
Switch display
directions/
Full display
c
※3
In Video Mode, each time of pressing switches the display
directions.
In Data Broadcasting Mode, each time of pressing switches
between the normal display and the full display.
Record video Oo( )(for at least one second)
※1
or p(for at least one
second)
Oo()
※1
or p to end
Record still image Oo()
※1
or p
Switch TV/data BC m()
※4
Each time of pressing switches between Video Mode and Data
Broadcasting Mode.
Operation Key operation
Information
Even when you switch displays by using Multitask while you are watching a 1Seg
program, the audio from the 1Seg program is output. (Play Background) The audio
might not be output, however, depending on the function or program. (See page 505)
When “TV sound while closed” is set to “ON”, the audio is output even if you close the
FOMA terminal while you are watching a 1Seg program. You cannot do anything
other than adjusting the volume when your FOMA terminal is closed.
The following might occur depending on the airwave conditions:
・The audio is interrupted.
・The data broadcasting is not operable.
・Block-shaped noise appears on the display or playing stops.
・The video or the data broadcasting is not displayed. (A dark screen appears.)
The caption might not be displayed depending on the program.
The data broadcasting cannot be displayed on the horizontal display.
If you move, the receivable airwaves or broadcasting stations might change being
affected by mountains or buildings. If reception on 1Seg goes bad after moving,
perform “Auto channel setting”; then reception might be improved via different
airwaves or you might be able to watch programs of other broadcasting stations.
If you use Channel Search to select channels after you move, etc., you might find the
channels you could not store by “Auto channel setting”. Execute “Add to ch. list” to
store the channels you found, and then you can watch the channel from the next time.
When starting 1Seg or switching channels, it takes a while before you can watch a
1Seg program.
Function Menu of Viewer Display
Information
Program info You can display information of the program you are
watching.
Program guide Seepage260.
Disp.Ch./operation
Channel info You can display the detailed display of the selected
channel list. Select a broadcasting station to switch to it.
Channel list Go to step 1 of “Select Channel List” on page 255.
Channel setting See page 254.
Add to ch. list You can add the broadcasting station you are currently
watching to the channel list.
YES
The broadcasting station is stored in the lowest
number of an unoccupied remote-control number
from 13 onward.
Tune service You can select a program to watch when the same
broadcasting station is broadcasting multiple services
(programs).
Select a channel.
Data broadcasting
Back to data BC You can stop browsing the data broadcasting site and
return to the data broadcasting.