User's Manual Part 2
259
1Seg
You can compose and send i-mode mail messages while watching a
1Seg program. (Multiwindow)
When you send an i-mode mail message to the FOMA terminal
supporting the “Media To” function by “Recom. channel mail”, the
receiving end can start 1Seg by using the “Media To” function.
You cannot operate 1Seg while the Message Composition display is shown. You
cannot show the caption and data broadcasting, either.
You can compose SMS messages as well while watching a 1Seg program.
1
Viewer displayi()Compose message
Compose message or Recom. channel mail
Compose message
. . . You can compose a new i-mode
mail message.
Go to step 2 on page 146.
Recom. channel mail
. . . You can compose an i-mode mail
message whose text contains the
information of the channel you
are watching.
Go to step 2 on page 146.
When the Message Composition
display is shown, you can switch
between the Message Composition display and the viewer display (horizontal
display) each time you press and hold c for at least one second.
Information
<Off timer>
In the following cases, the Off Timer confirmation display appears after each
operation finishes.
・During recording standby for Timer Recording
・During recording by Timer Recording
・When a still image is being saved
・When an unsaved image is left
・During channel search by Auto Channel Setting
Send i-mode Mail while Watching
Message
Composition
display
Viewer display
Information
Even when you show the Message Composition display/detailed Sent Mail display by
Multitask while you are watching a 1Seg program, the display appears in the multiwindow.
The ticker on the viewer display notifies you of the receiving of an i-mode
mail message, SMS message, and Message R/F. You can show the
detailed Received Mail display while you are watching a 1Seg program.
(Multiwindow)
You cannot show tickers when “Mail ticker display” is set to “OFF” or during Public
Mode (Drive Mode).
Only the audio is output from a 1Seg program without showing the viewer display when
you show a mail message from the party whose mail address is not stored in the
Phonebook.
You cannot operate 1Seg while the detailed Received Mail display is shown. You
cannot show the caption and data broadcasting, either.
You can show an SMS messages as well while watching a 1Seg program.
1
Receive i-mode mail while viewer display is shown
Press l( ) while the ticker is displayed.
When the detailed Received Mail display
is shown, you can switch between the
detailed Mail display and the viewer
display (horizontal display) each time you
press and hold c for at least one
second.
Only the audio is output from a 1Seg program without showing the viewer display if
you select “Mail history” from the Function menu of the Inbox/Outbox/Draft list or a
detailed mail display by Multitask while watching a 1Seg program and show the
detailed Sent Mail display of a mail message sent to a person whose mail address is
not stored in the Phonebook.
When “ ” or “ ” appears, press and hold +c for at least one second to switch to
the viewer display and then operate.
In B Mode of 2in1, you cannot compose/send i-mode mail message. (See page 450)
Receive i-mode Mail while Watching
Information
Detailed
Received
Mail display
Viewer
display