User's Manual Part 2
263
1Seg
The recorded still images are saved to your FOMA terminal (“Data box”→
“1Seg”→“Image” folder). You can save up to 3,500 files in total sharing
the memory space with other data files, however, the number of files you
can save decreases depending on the data volume. (See page 534)
See page 346 for displaying the recorded still image files.
You cannot save still images to the microSD card.
1
Viewer displayp
The confirmation tone sounds, and the still image is saved.
You can record still images also by pressing Oo( ) in Video Mode.
When the airwave reception level indicates “ ”, you cannot record still images.
When the airwave conditions are changed to indicate “ ” during recording,
recording shifts to pause state, then “ ” and “ ” are displayed. Video and
audio during that period are not saved.
If you remove the battery pack or pull out the microSD card during recording, the
recorded data is saved to the microSD card as the file that cannot be played back.
Depending on the broadcasting station or program, video and audio might be saved a
few seconds after your recording operation.
You cannot record when the video storage area is full. Also, you might not be able to
record when the unused space in the storage area is not enough. Delete unnecessary
video files and try again.
Some programs cannot use the storage area fully.
The file name and title name of the saved video are as follows:
File name: “PRGXXX”
Title name: “YYYY/MM/DD hh:mm”
(X: numerals, Y: year, M: month, D: date, h: hour, m: minute)
You cannot set the recorded video for the Stand-by display, ring tone or Call
Receiving display.
You cannot save video during AV output.
Record Still Images
Information
Information
The file name and title name of the saved still image are as follows:
File name: “YYYYMMDDhhmmXXX”
Title name: “YYYY/MM/DD hh:mm”
(Y: year, M: month, D: date, h: hour, m: minute, X: numeral)
You cannot set the recorded still image for the Stand-by display or the Call Receiving
display.
You can set TV Timer/Timer Recording of 1Seg. At the specified date/
time, an alarm sounds to notify you of the start of the program.
You can set TV Timer/Timer Recording also by using the channel information
displayed in the i-αppli Program Guide, sites, or mail. (See page 207)
You can set TV Timer by setting the date/time, channel, and program
name. You can use “Act. TV w/ alarm” to automatically start 1Seg at the
set time. You can set TV Timer for up to 100 programs.
1
m1SegTV Timer listl()
Do the following operations.
Select a program you set TV Timer for to check the contents. You can edit them
by pressing l().
See page 205 when images are stored to the maximum.
Data broadcasting and caption cannot be saved as still images.
You cannot record still images during AV output.
<TV Timer> <Timer Recording>
Setting TV Timer/Timer Recording of 1Seg
TV Timer List
Information
Channel Select a channel.
Edit title Enter a program name.
You can enter up to 48 full-pitch/96 half-pitch characters.
Start date
setting
Enter a date/time for starting watching.
Select an item.
Enter date . . . . . . Enter a date/time directly.
Choose date . . . . Select a date from the Calendar and enter a
time.