User's Manual Part 2
264
1Seg
Repeat Select a type of repeat.
If you select “Select day”, put a check mark for days of the week
to be set and press l().
The item set with repetition is counted as one item.
Alarm Select an alarm method.
ON. . . . . . . . . . . .Alerts you at the time set for the start date/time
comes. The setting for alarm notification is
completed.
ON/Set time . . . .Alerts you at the time set as the prenotification.
OFF. . . . . . . . . . .Does not alert. The setting for alarm notification
is completed. (You cannot watch the 1Seg
program.)
Select how many seconds (minutes) before the specified
time to be alerted.
When you set “Auto power ON” to “ON”, you cannot set “15
seconds before”, “30 seconds before”, and “45 seconds before”
as the prenotification time.
Alarm tone Select a type of alarm toneSelect a folder
Select an alarm tone.
Volume Use Bo to adjust the volume.
If you set to “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Act. TV w/ alarm Select an item.
Auto ON . . . . . . .After the Timer Alarm Notification display
appears, 1Seg automatically starts.
Manual ON. . . . .You can manually activate 1Seg from the Timer
Alarm Notification display.
OFF. . . . . . . . . . .The timer alarm sounds only. You cannot
activate 1Seg from the Timer Alarm Notification
display.
Auto power ON You can set whether to turn on the power automatically to sound
the timer alarm when the alarm time comes during power off.
ON or OFF
2
Press l().
You can set timer recordings by setting the date/time, channel, and
program name. You can set up to 100 timer recordings.
1
m1SegTimer recording listl()
Do the following operations.
Select a set timer recording to check the contents, and you can edit it by pressing
l().
You can display the used memory space (estimate) by pressing i().
1Seg volume You can set the sound volume of a 1Seg program when it is
activated by “Act. TV w/ alarm”.
Use Bo to adjust the volume.
Off timer You can set to end watching a 1Seg program for when the
specified time elapses after the 1Seg program automatically
starts by “Act. TV w/ alarm”.
Select a time.
Prefer manner
mode
You can set the sound volume of timer alarm for during Manner
Mode.
ON or OFF
ON . . . . Sounds at the same volume as set for “TV timer alarm”
on page 112.
OFF . . . Sounds at the volume set for this function.
Timer Recording List
Channel Select a channel.
Edit title Enter a program name.
You can enter up to 48 full-pitch/96 half-pitch characters.
Start date
setting
Enter a date/time for starting or ending recording. The timer alarm
sounds about one minute before the starting time.
Select an item.
Enter date. . . . . . . Enter a date/time directly.
Choose date . . . . Select a date from the Calendar and enter a
time.
End date setting