User's Manual Part 2

265
1Seg
2
Press l().
When the confirmation display appears asking whether to set the timer recording,
select “YES”. If you select “YES (default)”, the same confirmation display does
not appear afterward.
Repeat Select a type of repeat.
If you select “Select day”, put a check mark for days of the week
to be set and press l().
The item set with repetition is counted as one item.
Alarm You can set whether to sound alarm at the specified time of timer
alarm.
ON or OFF
Volume Use Bo to adjust the volume.
You cannot set the volume to “Step”.
Priority You can set a recording operation for when the start date/time
arrives while operating a function which cannot be started up
simultaneously.
Recording or Operation
Recording. . . . Suspends and terminates the function being
operated, and starts recording.
Operation . . . . The confirmation display appears asking
whether to start recording. Select “YES” to
suspend and terminate the function being
operated and start recording.
For while operating a function which can be started up
simultaneously, recording starts by the Multitask function.
When the start time arrives during a call (including dialing and
ringing), recording starts after you end the call. When you are
using another function during a call, recording starts after you
end the call and the function.
Overwrite setting When you set a recording to be repeated and set “Overwrite
setting” to “ON”, the program recorded last time is automatically
deleted and overwritten.
OFF or ON
Information
You can set TV Timer/Timer Recording also by using the program information
displayed in the i-αppli Program Guide, sites, or mail. In that case, the registration
display might appear with the start date/time, end date/time, channel, and program
name entered.
When you set TV Timer for multiple programs and set the timer alarm to sound at the
same date/time, the alarm preferentially sounds for the program whose start date/time
is the earliest. When the start date/time of the programs is the same, the alarm
preferentially sounds for the program you set last.
You cannot set multiple timer recordings whose recording time overlaps. If you set two
timer recordings and the recording end time of one program is the same as the
recording start time of the other, recording of the first program ends about one minute
earlier.
You cannot set TV Timer/Timer Recording for the programs whose start date/time or
timer alarm date/time is past (about one minute before the start date/time for Timer
Recording), except for the timer setting to be repeated.
The setting of TV Timer/Timer Recording whose timer alarm date/time is past is
automatically deleted. However, the timer setting to be repeated and the TV Timer
setting for which “Alarm” is set to “OFF” are not deleted. Further, the settings are not
deleted when you are operating the TV Timer/Timer Recording function at the alarm
date/time.
When no channel lists are set, you cannot set TV Timer/Timer Recording.
Turn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you have set “Priority” to “Operation” and the confirmation display is shown, the
recording does not start even at the recording start time and starts at the time you
select “YES”. However, the recording is not executed if the recording end time is over.
When “Overwrite setting” is set to “ON”, the timer recording starts after erasing the
program previously recorded. Regardless of whether you have watched the recorded
program or not, or whether you have succeeded or failed timer recording, the
previously recorded program is erased. If it is not erased before the timer recording
starts, recording might not start on time.
When you set “Overwrite setting” to “ON” for a recording, the file size of the recorded
video might become larger than that of the video recorded last time because the file
size varies depending on the recording (or watching) environment or programs. Note
that you might not be able to record correctly when the unused memory space in the
storage location is not enough.
The title of the recorded video file takes the program name booked for the timer
recording.