User's Manual Part 2
266
1Seg
The icon appears on the desktop.
“ ” . . . . Displayed when an alarm is set for today (except the setting for past time).
“ ” . . . . Displayed when an alarm is set for tomorrow or onward only.
If you set TV Timer with “Alarm” set to “OFF”, the icons are not displayed.
“ ” appears on the viewer display during recording by Timer Recording.
The audio from a 1Seg program is not output during recording started by Timer
Recording. You can output the audio by pressing -r or adjusting the sound volume,
however.
Function Menu while the TV Timer List or the Timer
Recording List is Displayed
Information
New Go to step 1 of “TV Timer List” on page 263 for TV Timer.
Go to step 1 on page 264 for Timer Recording.
Edit Go to step 1 of “TV Timer List” on page 263 for TV Timer.
Go to step 1 on page 264 for Timer Recording.
Sort You can change the display order.
Select an order.
Delete this YES
Delete past You can delete the setting of TV Timer/Timer Recording whose
start date/time or end date/time is set for the past date/time.
YES
Delete selected Put a check mark for the setting of TV Timer/Timer
Recording to be deletedl()YES
Delete all Enter your Terminal Security CodeYES
Memory info
[Timer Recording list
only]
You can display the used memory space (estimate).
When you set an alarm for “TV Timer” or “Timer recording”
<TV Timer>
If you set “Act. TV w/ alarm” to other than “Auto ON”, the alarm sounds for about five
minutes, and illumination lights. The vibrator works as the same setting for “Phone” of
“Vibrator”. The set start date/time, channel, program name and an animation appear on
the display.
If you set “Alarm” to “ON” and “Act. TV w/ alarm” to “Auto ON”, 1Seg automatically starts
when the specified time comes. The alarm does not sound.
To end watching, press h and select “End 1Seg”.
If you set “Off timer”, the confirmation display appears asking whether to continue
watching when the specified time elapses. If you select “NO” or do nothing for about 15
seconds, 1Seg automatically terminates.
<Timer Recording>
About one minute before starting time, the alarm sounds for about two seconds, and
illumination lights. The vibrator works as the same setting for “Phone” of “Vibrator”. The
set start date/time, end date/time, channel, program name and an animation appear on
the display, then the viewer display appears. If you do nothing for about one minute after
the recording starts, the Stand-by display appears. You can show the viewer display by
pressing x and selecting “Activate 1Seg”.
To end recording started by Timer Recording to save video, press p from the viewer
display and select “YES”. In Video Mode, you can end recording to save video also by
pressing Oo ( ) and selecting “YES”.
During a call
The alarm sounds from the earpiece.
During operations
<TV Timer>
When “Alarm setting” is set to “Operation preferred”, the timer alarm sounds only when
the Stand-by display is shown. When it is set to “Alarm preferred”, the timer alarm
sounds even while you are operating another function or during a call. (See page 413)
<Timer Recording>
Timer Recording works according to the setting of “Priority”. (see page 265) However,
Timer Recording might not work when you are reading to/writing from the microSD
card, or accessing the Data Storage Center.
When the time specified for “TV Timer” or “Timer recording”
comes