User's Manual Part 2

267
1Seg
When the timer alarm is set to the same time of “Alarm”, “ToDo”, or “Schedule”
The alarm sounds in the priority order of “Alarm” →“Timer recording” →“ToDo”→
“Schedule” → “TV timer”. A missed alarm of TV Timer/Timer Recording is notified by
the icon on the desktop.
When the power is turned off
The timer alarm does not sound except for the TV Timer setting with “Auto power ON”
set. For Timer Recording, you cannot record a 1Seg program unless the power is
turned on one minute before the start date/time.
The icon does not appear on the desktop even after turning on the power.
In Manner Mode
The vibrator, message display, and illumination light notify you. The alarm sounds at
the volume set for Manner Mode. (See page 111)
During Lock All, Personal Data Lock or Omakase Lock
The timer alarm does not sound. You cannot record a 1Seg program unless each lock
is released one minute before the start date/time.
After releasing each lock, the icon appears on the desktop to inform you.
During infrared communication, during iC communication, or while the microSD card is
operated
The timer alarm does not sound. You cannot record a 1Seg program unless each
function is finished one minute before the start date/time.
After each function is finished, the icon appears on the desktop to inform you.
While resetting settings or updating software program
The timer alarm does not sound. You cannot record a 1Seg program unless setting
reset or software update is finished one minute before the start date/time.
When the specified time comes during resetting settings, the icon does not appear on
the desktop even after resetting settings is completed.
Information
When you set “Alarm setting” to “Alarm preferred” for the setting of TV Timer/Timer
Recording and the alarm time comes while you are dialing, the alarm sounds after you
call up the other party. When the alarm time comes while ringing, the alarm sounds
after you start talking.
When you have set “PIN1 code entry set” to “ON” and set “Auto power ON” to
automatically turn on the power to sound TV timer alarm, the display for entering your
PIN1 code appears after the power is automatically turned on. The timer alarm does
not sound unless you enter your PIN1 code.
The alarm tone stops by pressing any of the keys, but the animation/i-motion becomes a
still image, and the timer alarm message stays displayed. When “Act. TV w/ alarm” is set
to “OFF”, press any key again to clear. However, you cannot clear the timer alarm
message by pressing a side key, with the FOMA terminal closed. When a call comes in,
the alarm stops.
Press Oo( ) and select “YES” from the Timer Alarm Notification display; then
1Seg starts, and you can watch the program set for TV Timer. In the case that a program
is being recorded, the video recorded up to that point is saved.
The icon appears on the desktop. You can check that icon for the contents of the missed
timer alarm (setting information) or recording result.
The setting information or recording result is the latest missed one.
When “Act. TV w/ alarm” is set to other than “OFF”, you can start 1Seg also by
pressing Oo( ) and select “YES” from the display of setting Information.
When recorded video is stored, you can play back the video also by pressing
Oo( ) from the display of recording result.
When you set “Auto power ON” to automatically turn on the power to sound a TV
timer alarm, the alarm sounds after the wake-up image stops.
You might not be able to set some i-motion movies/Chaku-uta Full
®
music files for TV
timer alarm.
Depending on the i-motion movie you set for TV timer alarm, only the audio might be
output at the specified time.
When a Chaku-uta Full
®
music file is set for TV timer alarm, only the audio is output at
the specified time. The illumination for when you play back a demo to select an alarm
tone differs from for when you are notified by an alarm.
To stop alarm tone/clear alarm message, animation, and
i-motion of TV timer alarm
When “Act. TV w/ alarm” of TV Timer is set to “Manual ON”
When “Timer Alarm Notification” is not executed or recording
is completed
Information