User's Manual Part 2

270

1Seg

Reset storage area i()DeleteDelete this or Delete all

Delete this. . . . Deletes only the information of the

affiliated broadcasting stations you

selected, from the broadcasting storage

area.

Delete all . . . . . Deletes the information of all affiliated

broadcasting stations created in the

broadcasting storage area.

YES

If you select “Delete all”, you need to enter your Terminal

Security Code.

Reset TV settings You can reset each of “User settings” to the default.

See “Function List” for the items to be reset.

(See page 476)

Enter your Terminal Security CodeYES

Check TV settings You can check each of “User settings”.

Information

<Icon>

The guide display might appear even if “Icon” is set to “OFF” when the airwave

conditions have got worse.

When you set to “ON”, you might not be able to have enough effects of “Image

quality”.

Mobile W-Speed becomes invalid during ECO mode, displaying in the multiwindow,

or AV output.

Depending on the broadcast state, you might not be able to have the effects of Mobile

W-Speed.

Even when “Mobile W-Speed” is set to “ON” during recording or during timer

recording, it is invalid when you play back the recorded video.

During displaying in Multiwindow, the settings of this function is valid and follows the

settings of “Backlight” on page 116.

When “TV sound while closed” is set to “ON”, the information about the data

broadcasting might be automatically updated, and you might be charged a packet

communication fee.

Regardless of the setting of this function, the audio is output even if your FOMA

terminal is closed when you switch displays by Multitask, or when the displays are

shown in multiple windows.

<Rec. program when call>

The recording cannot be started when the call comes in the following cases:

・During playing background ・During displaying in the multiwindow

・During recording ・During recording by Timer Recording

・During recording standby for Timer Recording

If you change this setting, “Set image display” of “i-mode settings” is also changed.

You cannot reset the confirmation display at the start of 1Seg (see page 252) and at

the time of Timer Recording (see page 265).

Information