User's Manual Part 2
208
i-mode/i-motion/i-Channel/i-concier
1
ii-mode settingsDo the following operations.
<i-mode Settings>
Setting i-mode
Scroll You can set the number of lines that are scrolled for when you
use Bo while displaying a site or screen memo.
Select the number of lines.
Character size See “i-mode” on page 123.
Set image display You can set whether to display images or Flash movies included
on sites or in screen memos.
ON or OFF
Set connection
timeout
See page 208.
Host selection See page 209.
Automatic replay
set.
See page 214.
Use phone
information
To display a Flash movie while a site or screen memo is
displayed, the information in the FOMA terminal may be used.
You can select whether to permit the information to be used for
that case.
YES or NO
Sound effect setting You can set whether to make an effect tone sound for when you
display a Flash movie while a site or screen memo is displayed.
ON or OFF
Information disp. See page 217.
Doc. display
settings
See page 394.
i-mode arrival act See page 87.
Reset last URL See page 198.
Check settings You can check each of “i-mode settings”.
It may take long to obtain some sites. You can set the time to wait before
canceling obtaining. Obtaining is not canceled automatically when
“Unlimited” is set.
1
ii-mode settingsSet connection timeout
Select a timeout value.
Information
<Set image display>
Even when “ON” is set, images might not be displayed correctly. In this case, “ ” is
displayed.
When “OFF” is set, “ ” is displayed and the data file is not received.
If you change this setting, “Set image display” of “User settings” of “1Seg” is also
changed.
<Use phone information>
The available information is as follows:
・Date and time set by “Set time”
・Reception level of radio waves
・Battery level
・Sound volume set by “Phone” of “Ring volume”
・Language selected by “Select language”
・Model name and serial number of FOMA terminal
<Sound effect setting>
Even when “ON” is set, the effect tones may not sound depending on Flash movies.
<Set Connection Timeout>
Setting Connection Timeout
Information
Even when you have set “Unlimited”, you may be disconnected owing to radio wave
conditions.