User's Manual Part 2

293
i-αppli/i-Widget
≥Some i-αppli programs can automatically connect to the i-mode Center after they are
downloaded. However, to use this service, you need to set it in advance in “Network
set” of “Software setting”.
≥“ ” appears at the top of the display while software information or a software program
is being downloaded from SSL pages.
≥At downloading, the confirmation display might appear asking whether to send the
“Phone/Terminal and UIM ID”. Select “YES” to start downloading. In this case, the
“Phone/Terminal and UIM ID” is sent to the IP (Information Provider) over the Internet,
so could be deciphered by third parties. However, your phone number, address, age,
and gender are not notified to the IP (Information Provider) or others by this operation.
≥If you attempt to re-download the software program that was downloaded using a
different UIM, the confirmation display appears asking whether to overwrite the
software program. With the Osaifu-Keitai compatible i-αppli, the confirmation display
appears telling that the data on the IC card is to be deleted. Select “YES” to start
downloading. When downloading ends, the software program that was downloaded
using a different UIM and the data on the IC card are deleted.
≥You cannot download some software programs while the IC card function is working
or IC Card Lock is activated.
≥Some software programs that start immediately after downloading cannot be saved.
≥Depending on the data volume on the IC card, you might not be able to download
Osaifu-Keitai compatible i-αppli even if there is still available space for software
storage. Delete the displayed software programs following the confirmation display,
and then download it again. (Some software programs might not be targeted for
deletion, depending on the software type to be downloaded.)
Depending on the software program, you need to start it and delete the files on the IC
card before deleting the software program itself.
≥You can save up to 2 Mbyte per i-αppli program.
≥“i-αppli mail” is the mail sent and saved by mail-linked i-αppli and mail received as
mail-linked i-αppli. i-αppli mail is automatically saved to the i-αppli mail folder.
≥The 3D polygonal
※
engine enables cubic images to be displayed in i-αppli.
※By combining polygons, a deep, cubic image is displayed.
Information
You can display software information when downloading i-αppli.
1
m1i-αppli1iαppli settings1Disp. software info
1Display or Not display
1
i(for at least one second)
1Select a software program to be started.
: GPS compatible i-αppli
: Osaifu-Keitai compatible i-αppli
: Management information i-αppli
: microSD card compatible i-αppli
: Vertical full display compatible i-αppli
: Horizontal display compatible i-αppli (incompatible
with full display)
: Horizontal full display compatible i-αppli
: i-αppli DX
: Mail-linked i-αppli
: Partially saved i-αppli
: Set for Auto Start
: Set for the i-αppli Stand-by display
: Set for both Auto Start and the i-αppli Stand-by display
: Can set for the i-αppli Stand-by display
: Downloaded from an SSL page
: Downloaded or upgraded by using a different UIM
Display Software Info
<i-αppli Run>
Starting i-αppli
Software list