User's Manual Part 2
294
i-αppli/i-Widget
You can display the Software list on the microSD card by
mi-αppliiαppli(microSD)Software list.
Each time you press c( ) from the Software list in the FOMA terminal,
the display format changes.
When you start an i-αppli DX program or while it is running, the confirmation
display might appear asking whether to permit the i-αppli DX program to use the
FOMA terminal’s information and functions.
When you start the Osaifu-Keitai compatible i-αppli program for the first time, the
confirmation display appears asking whether to make the UIM and IC card
compatible. The UIM information that has been made compatible is saved on the
IC card as IC owner information.
When you select a partially saved i-αppli program, you can download the
remaining part of it.
“ ” or “ ” is displayed while an i-αppli program is running.
To end i-αppli, press and hold r for at least one second or press h; then
select “YES”.
The software program you started last time comes at the top of the list. You
cannot manually change the order of software programs.
See page 205 when you select “Search by i-mode”.
You can show the Software list also by pressing i from the horizontal Stand-by
display.
Information
When a software program can be started from another program, the confirmation
display appears. When a software program to be started is not specified, select a
software program.
To start up i-αppli DX, set the data and time by “Set time” beforehand.
When a software program is running, melodies are played back at the volume set for
“Phone” of “Ring volume”. However, melodies are not played back during a call.
You may need to set the communication setting while a software program is running.
When communicating frequency is extremely high in a certain period of time while an
i-αppli program is running, the confirmation display appears asking whether to
continue communicating.
With some software programs, you can use the Web To function and the Phone To/
AV Phone To function from i-αppli. However, you cannot use them while the software
program is running as the i-αppli Stand-by display.
If you start the camera from i-αppli, the shot images are not saved with ordinary
images, but are saved as part of i-αppli for its usage.
If you start the camera from i-αppli, you can specify the image size or image quality for
some i-αppli programs.
You can scan JAN codes, QR codes, and Code128 from i-αppli using the camera.
The scanned data is saved and used by the software program.
Images
※
that are used by i-αppli and data you have entered might be sent over the
Internet to the server automatically.
※i-αppli uses the following types of images:
・Images shot by the camera after it is started from a camera-linked application
program
・Images obtained by the infrared communication function of i-αppli
・Images downloaded from sites or Internet web pages
・Images obtained from Data Box by i-αppli
i-αppli mail running under mail-linked i-αppli might not be displayed correctly.
Some i-αppli programs save the various information used on the i-αppli programs
when you end them. However, the information might not be saved if the low battery
alarm sounds or the battery pack is removed while the i-αppli program is running. If
the battery level indicates “ ”, either press -h or end the i-αppli program in
accordance with the operation of each software program.
You can save the data files of some software programs to the microSD card, but you
might not be able to use them for another model. You can check “iαppli data” for the
software programs that use the microSD card.
Some IPs (Information Providers) may access the software program stored in your
mobile phone and have it directly halted, depending on the software program. In that
case, you will not be able to start or upgrade the software program, or use it for the
Stand-by display. You can delete it or display the software information. To resume
running the software program, you need to receive the communication to cancel the
software halting state. Contact the IP (Information Provider) to inquire about that.
Some IPs (Information Providers) might send data to the software program stored in
your mobile phone depending on the software program.
When the IP (Information Provider) requests to halt or re-open the software program
or sends data to it, the mobile phone communicates and “ ” is displayed. In this
case, you are not charged a communication fee.
With some software programs, you can perform registering or deleting My Menu on
the i-αppli program.
Information