User's Manual Part 1

157
Mail
i-mode mail messages and Messages R/F arriving at the i-mode Center
are automatically sent to your FOMA terminal. However, the messages
will be held at the i-mode Center if your FOMA terminal cannot receive
mail because it is turned off or out of the service area, or when Receive
Option Setting is set to “ON”.
When “ (pink)” is displayed, receive mail by checking the i-mode Center.
See “Receive option” when “ ” is displayed.
1
Press and hold l for at least one second.
“ (pink)” and “ (yellow)/ (yellow)” blink, the message “Checking...” is
displayed, and then you receive i-mode mail messages and Messages R/F.
As the checking results, the number of newly received i-mode mail messages and
Messages R/F is shown.
≥You can also execute “Check new msg.” during a voice call by pressing
i().
≥To cancel receiving midway, press and hold r for at least one second.
However, the mail message might be received depending on the timing.
<Check New Messages>
Checking New i-mode Mail
Information
≥When icons such as “ (dark blue)”, “ (dark blue)/ (dark blue)” or “ (dark blue)”
are displayed, the FOMA terminal cannot receive any more i-mode mail messages or
Messages R/F. Delete unnecessary mail and messages, read unread mail and
messages, or release protection. (Read and unprotected mail and messages are
automatically deleted from the oldest one.)
≥Even when i-mode mail messages are held at the i-mode Center, the “ (pink)” icon to
that effect, or the “ (dark blue)” icon telling that messages are held to the maximum
at the i-mode Center might not appear. (This happens if mail arrives at the Center
when, for instance, your FOMA terminal is off.)
≥You can select items to be checked by “Set check new messages”.
≥You cannot use this function to receive SMS messages. Use “Check new SMS” to
receive them.
By “Rep.w/ i-mode mail”, you can reply with a normal i-mode mail
message, and by “Rep. w/ Deco-Anime”, you can reply with a
Decome-Anime message. By “Reply with quote”, you can quote the text
of your received i-mode mail to reply. You cannot use “Reply with quote”
for Decome-Anime messages and SMS messages.
1
Inbox list/Detailed Received Mail display1i()
1Reply/forward1Rep.w/ i-mode mail,
Rep. w/ Deco-Anime or Reply with quote
≥Press l( ) to reply by i-mode mail.
≥If other recipients of the simultaneous mail are found, you can choose whether to
reply to the sender only or to all addresses.
Select “To sender” or “To all”.
≥Just one quotation mark (see page 176) is added to the beginning of the text in
the i-mode mail to be replied with quote.
2
Enter a subject and text, and then send.
When you have selected i-mode mail, go to step 3 on page 142.
When you have selected an SMS message, go to step 3 on page 186.
After you send mail, “ ” changes to “ ”.
<Reply> <Reply with Quote>
Replying to Received i-mode Mail
Information
≥For the sender’s address that cannot be replied to (such as when the mail address
exceeds 50 half-pitch characters), “ ” is displayed.
≥“Re:” is prefixed to the subject of the mail message to be replied or replied with a
quotation. When the subject exceeds 100 full-pitch characters, the excess is deleted.
(When “Re:” has already been prefixed, it changes to “Re2:” and will be counted up to
“Re99:”.)
≥Even if the i-mode mail text contains pasted data, you cannot quote it in your reply.
Also, you cannot quote it when using the DOCOMO keitai datalink or infrared
communication function. See page 163 for pasted data.
≥If the Deco-mail text contains images prohibited from being attached to mail or being
output from the FOMA terminal, such images will be deleted when you reply.