User's Manual Part 1

171
Mail
Sent and received i-mode mail messages and SMS messages are stored
in Sent Address and Received Address, up to 30 messages each. You
can check the list for the mail addresses and phone numbers. When you
exchange mail messages with the same mail address or phone number,
the older one is deleted.
≥In Dual Mode of 2in1, up to 60 records for Address A/Number A and Address B/
Number B are stored in Received Address in total.
1
Press and hold Vo for at least one
second.
: i-mode mail successfully sent
: SMS message successfully sent
: i-mode mail failed to be sent
: SMS message failed to be sent
: Time-difference corrected time
≥Press m( ) from the Sent Address list to display Redial. When the Sent
Address list is displayed from Dialed Calls, you can press m( ) to display
Dialed Calls.
Press and hold Co for at least one
second.
: i-mode mail
: SMS message
: Time-difference corrected time
: i-mode mail message/SMS received to Address B/
Number B (only in Dual Mode of 2in1)
≥Press m( ) from the Received Address list to display Received Calls.
<Sent Address> <Received Address>
Displaying Sent/Received Mail Record
When Using Sent Address
When Using Received Address
Sent Address list
Received Address
list
2
Select a record to be displayed.
The detailed display of the Address list is displayed.
≥With an SMS message for which the other party’s phone number is not notified,
the reason for no caller ID is displayed.
≥To send i-mode mail to the displayed address, press Oo( ) and go to
step 3 on page 142. To send an SMS message to the displayed phone number,
press Oo( ) and go to step 3 on page 186.
≥To store in the Phonebook, press m( ). Go to step 2 of “Storing
Displayed Phone Number/Mail Address in Phonebook” on page 93.
Function Menu while Sent/Received Address is Displayed
Add to phonebook See page 92.
Compose message You can compose an i-mode mail message. The mail address
is entered in the address field.
Go to step 3 on page 142.
Compose SMS You can compose an SMS message. The phone number is
entered into the address field.
Go to step 3 on page 186.
Dialing When the mail address is stored in a Phonebook entry, you
can make a voice call, videophone call or PushTalk call to the
phone number stored in the Phonebook.
1Select a dialing type.
≥When you select “Select image”, select an image to be sent
to the other party during a videophone call. To cancel the
setting, select “Release”.
≥When multiple phone numbers are stored in a Phonebook
entry, you can dial the first phone number.
1Dial
≥The set item is indicated by “★”.
≥To make an international call, select “Int’l dial assist”, select
an international call access code, and follow the procedure
above after selecting “Dialing” from the Function menu. (See
page 59)
≥To set Caller ID Notification, select “Notify caller ID”. (See
step 2 of “Set Caller ID Notification when Making a Call” on
page 56)