User's Manual Part 1

174
Mail
Release selected You can select mail addresses or phone numbers, and
release the sort condition for them. (The items are deleted
from the Auto-sort Setting display.)
1Put a check mark for mail addresses or phone numbers
to be released1l()1YES
Release all You can release all sort conditions. (The items are deleted
from the Auto-sort Setting display.)
1YES
Information
<Look-up group>
≥On the Auto-sort Setting display, “ ” is added to the top of the name.
≥You cannot set groups on the UIM.
≥The secret mail messages received in ordinary mode (not in “Secret mode” or “Secret
data only”) are not sorted into the folder.
<Look-up mail group>
≥On the Auto-sort Setting display, “ ” is added to the top of the mail group name.
<Subject sort>
≥When the subject matches sort conditions for multiple folders, it is sorted to the folder
nearest to the “Inbox” folder or “Outbox” folder.
≥Even if you set “No title”, the i-mode mail titled with “No title” because of no entry
cannot be sorted.
≥SMS messages cannot be sorted by subject.
<Sort all>
≥You cannot sort SMS reports or SMS messages that have been directly received on
the UIM.
You can store mail addresses by group. You can send mail to regular
destinations.
You can store up to five addresses per group, and up to 20 groups.
1
m1Phonebook
1Phonebook settings1Mail group
1Select a Mail group to be stored.
≥When mail addresses are stored in a Mail group,
“ ” appears at the lower left of the display. Press l( ) to compose
i-mode mail to a selected Mail group set as the destination address.
Go to step 3 on page 142.
2
Highlight <Not stored> and press
l().
≥If you select a stored mail address, the Mail Group
Address Confirmation display appears.
3
Enter a mail address.
≥You can enter up to 50 half-pitch characters.
≥When you store multiple mail addresses, repeat step 2 and step 3.
+m-2-6
<Mail Group>
Creating Mail Group
Mail Group list
Detailed Mail Group
display
Function Menu of the Mail Group List
Compose message You can compose an i-mode mail message to the Mail group.
Go to step 3 on page 142.
Edit group name 1Enter a name of the Mail group.
≥You can enter up to 10 full-pitch/20 half-pitch characters.
Reset group name You can reset the name of Mail group to the default.
1YES