User's Manual Part 1

205
i-mode/i-motion/i-Channel/i-concier
You can set the host (APN) to use for receiving services other than
i-mode (DOCOMO).
If you change this setting, you will not be able to use i-mode.
1
i1i-mode settings1Host selection
1Highlight <Not recorded> and press l()
1Enter your Terminal Security Code.
≥If you select a stored host, the setting is changed to the selected one.
≥To delete the stored host, press i( ), select “Delete”, enter your
Terminal Security Code, and then select “YES”.
2
Do the following operations.
3
Press l().
+m-8-1
<Host Selection>
Changing a Host from i-mode
(ISP Connection Communication)
※Normally, you do not need to change this setting.
Host name 1Enter a host name.
≥You can enter up to 9 full-pitch/18 half-pitch characters.
Host number 1Enter a host number.
≥You can enter up to 99 half-pitch alphanumeric characters.
Host address 1Enter a host address.
≥You can enter up to 30 half-pitch alphanumeric characters.
Host address 2 1Enter a host address 2.
≥You can enter up to 30 half-pitch alphanumeric characters.
Information
≥Pake-hodai, Pake-hodai full and Pake-hodai double are not applied when you set the
host to other than i-mode.
1
i1Operate certificate1Certificate
1Highlight a certificate and press i()
1Do the following operations.
Certificate . . . . . . . . . . . . Certificates issued by the authenticating company and stored
in the FOMA terminal at purchase.
DOCOMO Certificate . . . Certificates required for connecting to the FirstPass Center or
FirstPass sites; they are stored on the UIM (green/white).
User Certificate . . . . . . . . Certificates downloaded from the FirstPass Center by
selecting “User certificate” from the i-mode menu; they are
stored on the UIM (green/white).
<SSL Certificate>
Operating SSL Certificates
Certificate info The subject name, author, validity period, and serial number of
the certificate are displayed.
≥You can check the certificate also by pressing Oo()
instead of i().
Valid/Invalid
The selected item is invalidated; then “ ” changes to “ ”.
≥When you select an invalid certificate, it will be validated.
≥If you set a certificate to invalid, you cannot display the sites with
that SSL certificate.
≥You cannot set “DOCOMO Cert 2” to “Invalid”.
Certificates used for SSL communication