User's Manual Part 1

46
Before Using the Handset
You can set the FOMA terminal to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
You can set whether to notify your caller ID on the network.
1
m1Set./Service1NW services1Caller ID notification
1Do the following operations.
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
+m-1-7
Set Caller ID Notification to Network
Activate 1ON or OFF
Check setting You can check the setting contents of “Activate”.
≥Your phone number (own number) is stored on the UIM.
1
m1Phonebook1Own number
You can press No to switch the tabs.
≥See page 414 for storing/displaying personal data.
+m-0
<Own Number>
Checking Your Own Phone Number
Own Number display
Phone number tab
List tab
Information
≥In Dual Mode of 2in1, you can switch between Number A and Number B by pressing
*Oo( ) from the Own Number display. “ ” appears for Number A, and “ ”
appears for Number B.
≥When you replace a UIM with another one while using 2in1, 2in1 Setting is
deactivated. For using 2in1, activate 2in1 Setting.