User's Manual Part 1

59
Voice/Videophone Calls/PushTalk
You can make a call adding a country/area code or international call
access code to a phone number. (Except for some countries and regions,
if the phone number starts with “0”, the “0” at the beginning is
automatically deleted.)
1
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
2
i()1Int’l dial assist
1Select a country/area name
1Select a name of International call access code
1d or Oo()
≥Press l( ) to make an international videophone call.
≥When the beginning of the phone number is “+”, the display for selecting a
country/area name is not displayed.
≥When “Japan” is selected as a country/area name, the display for selecting a
name of International call access code is not displayed.
You can set whether to replace “+” at the beginning of a phone number
with an international call access code for when you make an international
call from Japan.
1
m1Set./Service1Network setting1Int’l dial assist
1Auto assist setting1ON or OFF
1Select a country/area name
1Select a name of International call access code.
≥When no country/area code or international call access code is stored, the
confirmation display appears asking whether to store it. Select “YES” and go to
step 2 of “Country/Area Code” on page 59 for a country/area code, and go to
step 2 of “IDD Prefix Setting” on page 59 for an international call access code.
International Dial Assist
<International Dial Assist>
Setting for International Calls
Auto Assist Setting
You can store up to 27 country/area codes to be added for making
international calls from overseas.
1
m1Set./Service1Network setting1Int’l dial assist
1Country/Area Code
1Highlight <Not recorded> and press l().
≥If you select a stored country/area name, you can check the stored contents.
2
Enter a country/area name 1Enter a country/area code.
≥You can enter a country/area name of up to 8 full-pitch/16 half-pitch characters.
≥You can enter a country/area code of up to 5 digits. But you cannot use #, :, and
+.
You can store up to three international call access codes to be added to
the beginning of a phone number for making an international call.
1
m1Set./Service1Network setting1Int’l dial assist
1IDD prefix setting
1Highlight <Not recorded> and press l().
≥If you select the stored item, you can check the stored contents.
2
Enter a name1Enter an international call access code.
≥You can enter a name of up to 8 full-pitch/16 half-pitch characters.
≥You can enter an international call access code of up to 16 digits.
Country/Area Code
IDD Prefix Setting
Function Menu while Country/Area Code /IDD Prefix
Setting is Displayed
Edit Go to step 2 of “Country/Area Code” on page 59 for Country/Area
Code, and go to step 2 of “IDD Prefix Setting” on page 59 for IDD
Prefix Setting.
≥You can edit the item also by pressing l().
Delete this 1YES