User's Manual Part 1

69
Voice/Videophone Calls/PushTalk
By activating Record Message, you can play back an answer message to
incoming calls and record callers’ voice/video messages when you
cannot answer them even if you have not signed up for Voice Mail
Service.
You can record up to five messages for voice calls and up to two
messages for videophone calls. Each message can be recorded for up to
20 seconds.
1
m1LifeKit1Rec. msg/voice memo
1Record message setting1ON or OFF
1Select an answer message.
≥Press l( ) to play back the answer message. Press r to end the
demo playback.
≥When “Japanese 1”, “Japanese 2”, or “English” is set, a beep sounds after
playing back the answer message to the other party. If “Voice announce” is set,
the beep does not sound.
2
Enter a ring time (seconds).
≥Enter from “000” through “120” in three digits.
≥You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
≥While Record Message is activated, “ ”〜“ ” (the number of recorded
messages for voice calls) and “ ”〜“ ” (the number of recorded messages
for videophone calls) are displayed.
+m-5-5
<Record Message Setting>
Recording Voice/Video Messages when
You cannot Answer a Call
Activate Record Message
For videophone calls, the still image set for “Preparing” of
“Select image” is displayed on the other party’s display while
playing back the answer message, and the still image set for
“Record message” of “Select image” is displayed while
recording.
≥To answer a call while the answer message is being played
back or a voice/video message is being recorded, press
d or Oo().
For videophone calls, press d or Oo( ) to send
the image through your camera, or press m( ) to
send a substitute image.
You can answer a call also by pressing the switch on an
earphone/microphone (option). For videophone calls, the image through your camera
is sent to the other party.
Incoming calls when Record Message Setting is set to “ON”
Incoming Call Playing back the
answer message
Recording a voice/
video message
The ring time
elapses
Displaying an icon on the
desktop (See page 29)
Information
≥Record Message does not work when “ ” is displayed.
≥When Public Mode (Drive Mode) and Record Message are simultaneously activated,
the former has priority and the latter does not work.
≥The priority order of answer messages is as follows: “Setting for Phonebook entry” →
“Group setting” → “Record message setting”.
≥If “Voice announce” selected as an answer message is deleted, the answer message
will be set to “Japanese 1”.