User's Manual Part 1

70
Voice/Videophone Calls/PushTalk
Even if a call comes in while Record Message is not activated, you can
record the caller’s voice/video message just for that incoming call.
1
During ringing1l() or >
The caller will hear the answer message and then can leave you a voice/video
message.
≥During Key Lock, press and hold > for at least one second.
≥Record Message does not work when five messages for voice calls and two
messages for videophone calls have already been recorded. Also if you press >
while a PushTalk cal is arriving, Record Message does not work and Manner
Mode is set.
≥When Voice Mail Service or Call Forwarding Service is set at the same time as
Record Message, the priority depends on the ring time set for Voice Mail Service or
Call Forwarding Service. To give Record Message priority, set the ring time for
Record Message Setting shorter than that for Voice Mail Service or Call Forwarding
Service. Even when you do this, Voice Mail Service or Call Forwarding Service works
if there are already five record messages for voice calls and two record messages for
videophone calls.
≥You cannot receive a call from a third party while a voice/video message is being
recorded. The third party will hear the busy tone.
<Quick Record Message>
Recording a Message when You cannot
Answer an Incoming Call
Information
1
m1LifeKit1Rec. msg/voice memo
1Play/Erase msg.
1Select a record message or voice
memo.
A beep sounds and playback starts.
≥On the Record Message list, recorded items are indicated by “★”.
≥It is played back at the volume set for “Volume” (earpiece volume).
≥When playback ends, a double-beep sounds and the message “Playing” is
cleared from the display.
≥The date and time the message/memo was recorded are displayed during
playback. When a caller’s phone number is provided, it is displayed. If the caller is
stored in the Phonebook, his/her name is also displayed.
However, the name is not displayed and the phone number only is displayed in
the following cases:
・When you play back a record message from the caller stored as secret data in
Normal Mode
・When you play back a record message for Number A in B Mode (or vice versa)
while using 2in1
≥If the caller’s phone number is displayed during playback, you can make a voice
call to that phone number by pressing d. Press l( ) to make a
videophone call and press p to make a PushTalk call.
From the Stand-by display, press > to play back the latest record message. When
record messages are not recorded, a voice memo is played back.
+m-5-5
<Play/Erase Messages>
<Play/Erase Videophone Messages>
Playing/Erasing Record Messages/a Voice
Memo/Videophone Record Messages/
Movie Memos
Play Back/Erase Record Messages/a Voice Memo
Record Message list
To play back using .>