User's Manual Part 1

74
Voice/Videophone Calls/PushTalk
Brightness You can adjust the brightness of the camera image to be sent
to other party to -3 (dark) through +3 (bright).
1Select a brightness level.
White balance You can adjust the colors of the camera image to be sent to
the other party, to make the colors look more natural.
1Select an item.
Fine weather . . . . . For talking outdoors in fine weather
Cloudy weather . . . For talking in cloudy weather or in the
shade
Automatic. . . . . . . . For adjusting white balance
automatically
Light bulb . . . . . . . . For talking under incandescent light
Color mode set You can switch the color tone of the camera image to be sent
to the other party.
1Select a color tone.
Night mode You can lengthen the camera’s exposure time to make the
camera image to be sent clear in a dark place.
1ON or OFF
Focus You can set the focus for the outside camera during a
videophone call.
1Close-up or Landscape
≥The focus for the inside camera is fixed to “Portrait” (suitable
mode to shoot portraits), so you cannot change the setting.
Chara-den setup See page 72.
Backlight You can select whether to light the display constantly or light
for about 15 seconds after an operation.
1Constant light or 15 seconds light
LCD AI See page 114.
Own number You can display your phone number.
Key guide You can display the guide of key operation during a
videophone call.
At videophone
start-up
0
At videophone
start-up
Automatic
At videophone
start-up
Normal
At videophone
start-up
OFF
At videophone
start-up
Landscape
You can set whether to switch to Hands-free automatically for when a
videophone call starts.
1
m1Set./Service1Videophone
1Hands-free w/ V. phone1ON or OFF
≥See page 61 for the operation while Hands-free is activated and how to switch to
Hands-free.
You can set the quality of both the received image and sent image on the
display.
1
m1Set./Service1Videophone1Visual preference
1Select an image quality.
≥“Prefer motion spd” is effective when there is motion in an image. When there is
little motion, the quality becomes better if you set to “Prefer img qual”.
≥If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
<Hands-free with Videophone>
Setting Hands-free Videophone
<Visual Preference>
Setting Image Quality for Videophone
Calls
Information
≥If the radio wave conditions weaken during a videophone call, the image may appear
like a mosaic.