User's Manual Part 3

340
Map/GPS Function
You can use this setting for changing the host for Service Settings.
1
m1LifeKit1Map/GPS1GPS settings1Host selection
1Highlight <Not stored> and press l().
≥If you select a stored host, the setting is changed to that host.
≥To delete a stored host, press i( ), select “Delete” and select “YES”.
2
Do the following operations.
3
Press l().
Host Selection
※Normally, you do not need to change this setting.
Host name 1Enter a host name.
≥You can enter up to 9 full-pitch/18 half-pitch characters.
Host number 1Enter a host number.
≥You can enter up to 99 half-pitch alphanumeric characters.
Host address 1Enter a URL.
≥You can enter up to 100 half-pitch alphanumeric characters.