User's Manual Part 3

432
Character Entry
1
Move the cursor to the left of the character you want to
correct1r
The character at the right of the cursor is deleted.
Press and hold r for at least one second to delete all characters on and after the
cursor.
≥When no character is found to the right side of the cursor, the character to the left
side of the cursor is deleted. Press and hold r for at least one second to delete
all characters.
2
Enter a correct character.
The character is entered in the position of the cursor.
Other Entry Functions
Item Operation/Explanation
Katakana input Press l( ) a few times to switch to Katakana input
mode1Press keys to enter characters.
Alphabet input Press l( ) a few times to switch to Alphabet input
mode1Press keys to enter characters.
≥When you press c( ) in half-pitch Alphabet input
mode, you can show the list of phrases frequently used for
entering URLs and others.
Numeral input Press l( ) a few times to switch to Numeral input
mode 1Press keys to enter numerals.
≥You can enter “+” by pressing and holding 0 for at least one
second in Numeral input mode.
Line feed Press a.
≥When the cursor is at the end of text and characters are fixed,
you can press Xo to break a line.
Information
<Line feed>
≥A line feed is counted as one full-pitch character.
≥You cannot break a line depending on the function such as editing in the text box for
i-mode.
≥You can enter “＊” by pressing -a in Numeral input mode.
Correct Characters
When the battery alarm sounds
The data you have been editing is automatically fixed and saved. Charge the battery or
replace it with a new charged battery to resume editing. However, you cannot save the
unfixed data being converted.
When you press h
The confirmation display appears asking whether to discard the data you are editing.
When a call or mail comes in
The Multitask function works, so the data you are editing is retained, and you can answer
the call or receive the mail.
You can return to the data edit display by switching menu, by pressing and holding x for
at least one second. You can return to the data edit display also by ending the call or mail
function.
You can set whether to display the prediction conversion/context
forecast candidates in the candidate list.
1
m1Set./Service1Other settings
1Character input method1Predict1ON or OFF
You can set whether to store the characters converted in Secret Mode or
Secret Data Only as learned words.
1
m1Set./Service1Other settings
1Character input method1Int.with secret
1Enter your Terminal Security Code1ON or OFF
≥See page 144 for the Function menu of the Message Entry display.
Data you are editing
+m-3-5
Predict
+m-3-5
Intelligent with Secret
Function Menu while Entering (Editing) Characters
Full pitch/Half pitch You can switch between full pitch and half pitch.
Copy See page 436.
Cut See page 436.