User's Manual Part 3

436
Character Entry
You can cut or copy up to 5,000 full-pitch/10,000 half-pitch characters.
1
Character Entry (Edit) display1i()
1Cut or Copy1Select a start point.
≥You can press i( ) to select all characters.
2
Select an end point.
You can paste cut or copied characters.
1
Character Entry (Edit) display
1Move the cursor to a start position for pasting
1i()1Paste
Cutting/Copying/Pasting Text
Cut/Copy
Information
≥If you copy/cut the Deco-mail text during creating and paste it, the information about
the decoration is pasted as well.
≥You might not be able to cut/copy the Deco-mail text, etc., because the memory
space runs short depending on the data volume.
Paste
In Own Dictionary, you can store up to 100 frequently used words with
your favorite reading.
1
m1Stationery1Common phrase/dic.
1Own dictionary1<New>1Enter a word.
≥Select a stored Own dictionary to check the stored contents.
≥You can enter up to 10 full-pitch/20 half-pitch characters. However, you cannot
enter line feeds.
2
Enter a reading.
≥You can enter up to 10 hiragana characters. Also, you cannot store symbols
other than “Long vowel (ー )”.
≥Even if you enter a space, the word is stored with the space automatically
deleted.
+m-3-8
<Own Dictionary>
Storing Words in Own Dictionary
Function Menu while Own Dictionary is Displayed
New Go to step 1 of “Storing Words in Own Dictionary” on page 436.
Edit Go to step 1 of “Storing Words in Own Dictionary” on page 436.
≥You can edit also by pressing l().
Delete this 1YES
Delete selected 1Put a check mark for own dictionaries to be deleted
1l()1YES
Delete all 1Enter your Terminal Security Code1YES
Information
<Delete this> <Delete all>
≥When you display Own Dictionary from the Function menu of the Character Entry
(Edit) display, select “Delete” from the Function menu, then select “Delete this” or
“Delete all”.
<Delete selected>
≥“Delete selected” does not appear when you display Own Dictionary from the
Function menu of the Character Entry (Edit) display.