User's Manual Part 3

438
Character Entry
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
≥See page 496 for how characters are assigned to the numeric keys (2-touch).
≥See page 430 for switching to “2-touch”.
Press l( ) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
<Example> Enter “タダの菓子” in a text memo.
1
m1Stationery1Text memo1Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana input mode.
た→41
だ→41, a
の→55
か→21
し→32
≥You can switch between uppercase and lowercase or enter “゛” and “゜” by
pressing a after you enter a character.
≥Press 80 to switch between uppercase and lowercase.
After entering hiragana characters, go to step 3 on page 431.
<Mode 2 (2-touch)>
Entering Characters in Mode 2 (2-touch)
Switch Input Modes (2-touch)
Enter Characters
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
≥See page 497 for how characters are assigned to the numeric keys (NIKO-touch).
≥See page 430 for switching to “NIKO-touch”.
Press l( ) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
<Example> Enter “タダの菓子” in a text memo.
1
m1Stationery1Text memo1Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana input mode.
た→41
だ→41, a
の→55
か→21
し→32
≥You can switch between uppercase and lowercase or enter “゛” and “゜” by
pressing a after you enter a character.
After entering hiragana characters, go to step 3 on page 431.
<Mode 3 (NIKO-touch)>
Entering Characters in Mode 3 (NIKO-touch)
Switch Input Modes (NIKO-touch)
Enter Characters