User's Manual Part 3

441
Network Services
1
m1Set./Service1NW services1Voice mail
1Do the following operations.
Use Voice Mail Service
Play messages You can play back messages recorded for the Voice Mail.
1Play (voice call) or Play (videophone)1YES
1Operate following the voice guidance.
≥The display for selecting “Play (voice call)” or “Play
(videophone)” does not appear when only one type of message
is recorded.
Activate 1YES1YES1Enter a ring time (seconds).
≥Enter from “000” through “120” in three digits.
Deactivate 1YES
Set ring time You can set the ring time until the call is connected to the Voice
Mail Service Center.
1Enter a ring time (seconds).
≥Enter from “000” through “120” in three digits.
Check setting You can check the setting contents of Voice Mail Service.
Setting You can switch the setting contents of Voice Mail Service.
1Setting (voice call) or Setting (videophone)1YES
1Operate following the voice guidance.
Check new
messages
See page 440.
Message
notification
You can set the ring tone to sound when a new message is
recorded. The ring tone set for “Mail” of “Select ring tone” sounds
for about five seconds.
1YES or NO
Erase icon You can erase the Voice Mail icons (such as ) from the
Stand-by display.
1YES
Activate notice call By SMS messages, you can be notified of the information (date/
time of receiving and caller ID) of missed calls which came in
while you were out of the service area or the power was turned
off.
1Select an item.
All calls . . . . . . . . . . . .Informs you of all received calls.
Calls w/ caller ID . . . . Informs you of only the calls that notified
the phone number.
1YES
Deactivate notice
call
1YES
Notice call status You can check the setting contents of notice call.
Voice mail set for
VP
You can set whether to use Voice Mail Service for when a
videophone call comes in.
1ON or OFF
≥Even if “ON” is set, you cannot use the function unless Voice
Mail Service is set to “Activate”.
Information
<Play messages> <Setting>
≥You cannot operate during a call.
≥If you press -0 through -9, -a, or -s following the voice guidance, you may not
be able to end the call by pressing -h. In this case, press -h again.
<Set ring time>
≥If “Set ring time” is set to 0 seconds, the calls are not recorded in Received Calls.
<Erase icon>
≥Even if you erase the Voice Mail icons, the messages held at the Voice Mail Service
Center are not erased.
<Activate notice call>
≥Even when you set to reject all SMS messages, you are informed by SMS message
of the received call records.