User's Manual Part 3

442
Network Services
You can connect an incoming call to the Voice Mail Service Center just by
a simple key operation. Even if you do not set Voice Mail Service to
“Activate”, the service will be available using this function.
1
During ringing1i()1Voice mail
≥You can connect the incoming call to the Voice Mail Service Center also by
pressing i( ), and pressing s.
You can automatically connect the calls coming from the phone numbers
stored in the Phonebook to the Voice Mail Service Center regardless of
the Activate/Deactivate setting for the Service.
You can specify up to 20 phone numbers.
This setting is valid only when the caller notifies his/her phone number.
It is advisable to activate “Caller ID request” at the same time.
1
Detailed Phonebook display1i()
1Restrictions1Enter your Terminal Security Code
1Voice mail
“Voice mail” is indicated by “★”.
≥To release “Voice mail”, perform the same operation.
Forward an Incoming Call to Voice Mail Service Center
during Ringing
Forward Specified Calls to Voice Mail Center
Information
≥When a call comes in from the phone number set with this function, the ring tone
sounds for about one second and then the call is connected to the Voice Mail Service
Center. You will be notified of the call by the icons on the desktop (see page 29 and
page 68) and “Received calls”.
≥Even if you set this function, all incoming calls are not connected to the Voice Mail
Service Center when you set “Personal data lock” while Voice Mail Service is
deactivated.
When a call comes in during a call, this service notifies you of it by the
ring tone in call, and enables you to place the current call on hold to
answer the new call.
Further, you can make a call to another person putting the current call on
hold.
≥To use Call Waiting Service, set “Arrival call act” (see page 447) to “Answer” in
advance. When another option is set, you cannot answer a voice call during a voice
call even if you set “Call waiting” to “Activate”.
1
m1Set./Service1NW services1Call waiting
1Do the following operations.
1
Another call comes in during a call1d
The current call is automatically put on hold so that you can receive another call.
≥“Multi calling” is displayed when there is the party on hold.
≥Each time you press d, you can switch the parties you can talk with.
<Call Waiting>
Using Call Waiting Service
Use Call Waiting Service
Activate 1YES
Deactivate 1YES
Check setting You can check the setting contents of Call Waiting Service.
Answer an Incoming Call during a Call