User's Manual Part 3

446
Network Services
This service provides the guidance asking the caller ID notification
against incoming voice calls/videophone calls without caller IDs, and
then automatically disconnects the call.
≥The call rejected by Caller ID Display Request Service is not stored in “Received calls”,
and the “Missed call” desktop icon does not appear.
■Relation between each Service and incoming calls while Caller ID Display
Request Service is activated
1
m1Set./Service1NW services1Caller ID request
1Do the following operations.
Delete last entry You can delete the phone number registered last. Repeat the
same procedures to delete phone numbers one by one from the
one registered last.
1YES1OK
Delete all entries 1YES1OK
Check No. of entries You can check the number of phone numbers registered for
rejection.
<Caller ID Request>
Using Caller ID Display Request Service
Service Handling incoming call from the caller who does not notify a caller ID
Voice Mail Service Caller ID Request guidance is played back. (Message is not held.)
Call Forwarding
Service
Caller ID Request guidance is played back.
(Not forwarded to the forwarding destination.)
Call Waiting
Service
Caller ID Request guidance is played back.
Nuisance Call
Blocking Service
For the call from the number registered to be rejected, the Call
Rejection guidance is played back.
Public Mode
(Drive Mode)
Caller ID Request guidance is played back.
[Public Mode (Drive Mode) guidance is not played back.]
Activate 1YES1OK
Deactivate 1YES1OK
Check setting You can check the setting contents of Caller ID Display Request
Service.
You can use a mova phone with the phone number for your FOMA
terminal. You can use either your FOMA terminal or mova phone
depending on the service area.
≥You cannot use your FOMA terminal and mova phone at the same time.
≥You need to operate Dual Network Switching from the phone which is not using the
service.
1
m1Set./Service1NW services1Dual network
1Do the following operations.
Information
≥If you activate this service while “Call setting w/o ID” is set to “Reject”, this service has
priority.
≥When you receive a PushTalk call, “Turn on Caller ID Notification.” is displayed on the
caller’s display and the call is automatically cut off. When you receive a group call, “ID
Request” is displayed.
≥You can set and confirm this setting from the FOMA terminal with your own UIM
inserted. You cannot remote-control the setting from land-line phones, public phones,
and other mobile phones.
<Dual Network>
Using Dual Network Service
Dual network
switching
You can switch to the FOMA terminal so that you can use it.
Operate when the FOMA is in the FOMA service area.
1YES1Enter your Network Security Code.
≥See page 122 for the Network Security Code.
Check setting You can check the setting contents of Dual Network Service.