User's Manual Part 3

448
Network Services
You can activate/deactivate the functions you selected in Arrival Call Act
and can check the setting contents.
1
m1Set./Service1NW services1Set in-call arrival act
1Do the following operations.
Call rejection You can reject voice calls, videophone calls, or 64K data
communication that come in during a call.
Answer If you have set “Call waiting” to “Activate” and receive a voice call
during a voice call, you can use “Call waiting”. Any of the following
operations is available during a voice call (when “Call waiting” is
set to “Deactivate”), during a videophone call, or during 64K data
communication.
≥You can answer incoming voice calls, videophone calls, or 64K
data communication after finishing the current voice call,
videophone call or 64K data communication.
≥From the Function menu, you can manually operate voice calls,
videophone calls, or 64K data communication that come in
during a call.
≥When “Voice mail” or “Call forwarding” is set to “Activate”, your
FOMA terminal follows that setting.
Set In-call Arrival Act
Activate 1YES
Deactivate 1YES
Check setting You can check the setting contents of In-call Arrival Act.
Information
≥You can set and confirm this setting from the FOMA terminal with your own UIM
inserted. You cannot remote-control the setting from land-line phones, public phones,
and other mobile phones.
You can set “Voice mail” or “Call forwarding” to be operated from
touch-tone land-line phones, public phones, DOCOMO mobile phones, or
others.
≥To use “Voice mail” or “Call forwarding” overseas, you need to set “Remote control” to
“Activate” in advance.
1
m1Set./Service1NW services1Remote control
1Do the following operations.
You can add and use the additional number 1 and 2 at maximum as the
phone numbers of your FOMA terminal besides the basic number.
≥When you remove or replace the UIM, the multi number settings (name, phone
number, etc.) stored in the FOMA terminal might be erased. In this case, store them
again.
≥The name that corresponds to each multi number (Basic Number/Additional Number1/
Additional Number2) appears on the dialing display/Call Receiving display.
≥When you try to make a call from Redial, Dialed Calls, or Received Calls, the multi
number you dialed/received at that time appears and the call is made by this number.
<Remote Control>
Setting Remote Control
Activate 1YES
Deactivate 1YES
Check setting You can check the setting contents of Remote Control.
Information
≥You can set and confirm this setting from the FOMA terminal with your own UIM
inserted. You cannot remote-control the setting from land-line phones, public phones,
and other mobile phones.
<Multi Number>
Setting Additional Number