User's Manual Part 3

449
Network Services
You can register additional numbers, and edit the registration names for
them.
1
m1Set./Service1NW services1Multi number
1Number setting1Select an additional number.
≥You can register/edit also by pressing i( ) and selecting “Edit” or by
pressing l().
≥Select the registered additional number to check the registration name and
phone number.
≥To delete the registered additional number, press i( ) and select
“Delete this” or “Delete all”, then select “YES”.
2
Enter a registration name1Enter a phone number.
≥You can enter up to 8 full-pitch/16 half-pitch characters for a registration name.
By switching this setting, you can make all calls from a specified phone
number.
1
m1Set./Service1NW services1Multi number
1Set multi number1Select a phone number.
Basic Number . . . . . . . . . . Dials by the contracted phone number.
Additional Number1/2 . . . . Dials by an additional number.
≥When the registration name is changed, each registration name is displayed.
However, the registration name is not displayed during Personal Data Lock.
2
YES
Number Setting
Set Multi Number
Before making a call, you can select a phone number to be notified to the
other party from the Function menu, and then make a call.
1
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
2
i()1Multi number1Select a phone number.
≥To cancel the additional number, select “Cancel prefix”.
You can check a phone number set for “Set multi number”.
1
m1Set./Service1NW services1Multi number
1Check setting
You can set a ring tone for calls that come in to the additional number.
1
m1Set./Service1NW services1Multi number
1Set as ring tone1Select an additional number.
Go to step 2 on page 104.
When the ring tone is set to “Same as ring tone”, the ring tone will be the one set for
“Phone” or “Videophone” of “Select ring tone”.
Set Own Phone Number when Making a Call
Information
≥If you select “Basic Number” or “Additional Number1/2”, “:590＃”, “:591＃”, or
“:592＃” is added after the phone numbers.
Check Setting
Set as Ring Tone