User's Manual Part 3

450
Network Services
You can use two phone numbers/mail addresses on your single FOMA
terminal. By using respective modes, you can operate your FOMA
terminal as if you are using two sets of them.
The following three modes are available with 2in1:
A Mode
You can use your phone number (Number A) to make calls and your i-mode mail
address (Address A) to send/receive mail messages, and can browse their related
data.
B Mode
You can use your 2in1 phone number (Number B) to make calls and access the sites
for Web mail (Address B), and can browse their related data.
Dual Mode
This mode has the functions of both A Mode and B Mode.
≥For details on 2in1, refer to “Mobile Phone User’s Guide [2in1]”.
≥Address B is used to send/receive mail messages via the dedicated Web mail site.
≥You can use packet communication even in B Mode if you subscribe to i-mode.
≥You can subscribe to either 2in1 or Multi Number.
≥When you replace a UIM with another one while using 2in1, 2in1 Setting is deactivated.
For using 2in1, activate 2in1 Setting.
≥See page 453 for how this service works for each mode.
<2in1>
Using 2in1
1
m1Set./Service1NW services
12in1 setting
1Enter your Terminal Security Code
1YES
When you activate 2in1, the 2in1 Setting Menu display
appears.
≥This display appears also by pressing and holding <
for at least one second with the FOMA terminal opened and entering your
Terminal Security Code.
1
2in1 Setting Menu display1Do the following operations.
Activate 2in1
2in1 Setting Menu display
Configure 2in1 Setting
Mode switching You can switch to the mode you use.
1Select a mode.
≥When 2in1 is activated, the display for selecting a mode
appears also by pressing and holding < for at least one
second from the Stand-by display with the FOMA terminal
opened, and entering your Terminal Security Code.
≥When “Mode link setting” is activated, the confirmation
display appears telling that the setting for “Receive
avoidance set.” is also changed.