User's Manual Part 3

451
Network Services
Phonebook 2in1
setting
You can change Phonebook 2in1 Setting for the Phonebook
entry stored in the FOMA terminal.
1Select an item.
Set to A . . . . . . . . . . Sets as the Phonebook entry for A. You
can use it in A Mode and Dual Mode.
Set to B . . . . . . . . . . Sets as the Phonebook entry for B. You
can use it in B Mode and Dual Mode.
Set to Common . . . Sets as the common Phonebook entry
for A and B. You can use it in all modes.
1Select a setting method.
Set one . . . . . Sets a Phonebook entry you call up.
Set some. . . . Select multiple Phonebook entries from the
Phonebook list you call up, then press
l().
Set group . . . Sets a Phonebook group you call up.
Stand-by display You can set the Stand-by display that appears in Dual Mode
or B Mode.
1Select a mode1Set the Stand-by display.
≥See page 111 for how to set the Stand-by display. However,
“iαppli display” is not displayed.
≥If you select “Release”, the setting returns to the default.
Clock setting You can set the clock that appears on the Stand-by display in
Dual Mode or B Mode.
1Select a mode1Set a clock.
≥See page 120 for how to set the clock.
Set call/receive No.
Disp. call/receive
No.
For Number A and Number B, you can set the respective
character font and color for the names stored in the
Phonebook and phone numbers shown on the display.
1Number A or Number B1Set a font and color.
≥See page 119 for how to set the font and color.
Ring tone set. for
No. B
You can set a ring tone for Number B and a mail ring tone for
Address B.
1Select an item.
Phone. . . . . . . . . . Sets a ring tone for voice calls.
Videophone. . . . . Sets a ring tone for videophone calls.
Mail. . . . . . . . . . . . Sets a ring tone for i-mode mail messages
and SMS messages.
1Select a type of ring tone.
Go to step 3 on page 104.
≥If you select “Release”, the setting returns to the default.
2in1 function OFF You can deactivate 2in1.
1YES
Receive avoidance set.
Change recv. avoid. You can set Receive Avoidance Set. manually for Number A
and Number B.
1Number A or Number B1Select an item.
Unchange . . . Does not change Receive Avoidance Set.
Receive . . . . . Receives the calls to the selected phone
number.
Avoid . . . . . . . Avoids the calls to the selected phone
number.
1l()1YES
≥When “Mode link setting” is activated, the confirmation
display appears telling that it is necessary to deactivate it.
Check recv.
avoidance
You can check Receive Avoidance Set.
Mode link setting You can activate/deactivate Mode Link. When you activate it,
Receive Avoidance Set. automatically changes by linking to
switching of the mode of 2in1; You can receive a call only to
Number A when in A Mode, only to Number B when in B
Mode, and to both Number A and B when in Dual Mode.
1YES