User's Manual Part 3

456
Network Services
“OFFICEED” is an in-group fixed bill service that applies to the specified
IMCS (In-building Mobile Communication System).
The separate subscription is required for use.
For details, check the DOCOMO-enterprise-oriented web page (in
Japanese only). http://www.docomo.biz/d/212/
You can use the OFFICEED out-of-area forwarding function to forward
OFFICEED calls to out-of-OFFICEED area.
1
m1Set./Service1NW services1OFFICEED
1Do the following operations.
<OFFICEED>
Using OFFICEED
Use OFFICEED Out-of-Area Forwarding Function
Area display setting You can set whether to display “ ” while you are in the
OFFICEED area.
1ON or OFF
≥If you select “ON”, the confirmation display appears asking
whether to set Area Display Setting to “ON”.
Activate forwarding You can activate the OFFICEED out-of-area forwarding function.
1YES
Deactivate
forwarding
You can deactivate the OFFICEED out-of-area forwarding
function.
1YES
Check forwarding
set.
You can check the setting of the OFFICEED out-of-area
forwarding function.
When a new network service is provided by DOCOMO, you can register
that service in the menu to use it.
1
m1Set./Service1NW services1Additional service
1Additional service
1Highlight <Not stored> and press i()
1Add new service
≥You can change the setting for the registered service by pressing i()
and selecting “Edit”.
≥To delete the registered service, press i( ) and select “Delete this” or
“Delete all”, then select “YES” → “OK”.
≥You can register up to 10 network services.
2
Enter a service name
1Enter number or Enter USSD number
Select either “Enter number” or “Enter USSD number” according to the service
contents you add.
≥You can enter up to 10 full-pitch/20 half-pitch characters.
3
Enter either a special number or a service code (USSD
number)1YES
<Additional Service>
Saving and Using Services
Add New Service
Information
≥You need to check and enter “Special number” or “Service code” supplied by
DOCOMO for using the services.
Special number
. . . . Number for connecting the Service Center.
Service code (USSD number)
. . . . With the FOMA terminal, enter it as USSD. The code is for notifying to the
Service Center.