User's Manual Part 3

465
Overseas Use
1
x(for at least one second)1Select a network type.
Auto. . . . . . . . . For using 3G, GSM, or GPRS network. (3G network has priority.)
3G . . . . . . . . . . For using 3G network.
GSM/GPRS . . . For using GSM or GPRS network. When you switch to “GSM/
GPRS” from “Auto” or “3G”, the confirmation display appears to
tell your phone will be out of service area in Japan.
≥While you use the FOMA terminal overseas, “Call setting w/o ID”, “Reject unknown”,
and “Restrictions (except Restrict Dialing)” might not work. In addition, it might work as
“Answer” regardless of the setting of “Arrival call act”.
≥When a call comes in during international roaming, the call is forwarded from Japan.
The caller is charged a call fee to Japan and the receiver is charged a receiving fee.
<3G/GSM Setting>
Setting a Network to Use
Information
Information
≥If you set to “Auto” or “3G”, FOMA network is used in Japan. If you set to “GSM/
GPRS”, you cannot connect to FOMA network, the FOMA terminal is placed in
out-of-service-area state.
≥While another menu function is activated, the setting display for this function does not
appear by pressing and holding .x for at least one second from the Stand-by display,
but the display for the menu function in use appears.
You can set whether to automatically search a network and connect to
another carrier when you move out of the service area.
1
m1Set./Service1Network setting1Int’l roaming
1Network search mode1Select an item.
Auto . . . . . . Automatically re-connects to another carrier. The setting is completed.
Manual. . . . Connect manually to a carrier on the list.
“×” is displayed for unavailable carriers.
Network re-search
. . . . . . . . . . When set to “Auto”, automatically switches to an available carrier. The
setting is completed.
When set to “Manual”, displays the list of carriers.
2
Select a carrier.
≥The displayed carrier varies depending on the setting of “3G/GSM setting”.
≥Press l( ) to display the list of carriers again.
<Network Search Mode>
Setting a Search Method of
Telecommunication Carrier
Information
≥You cannot set this function if the UIM is not inserted.
≥When you move out of the service area while this function is set to “Manual”, “ ”
appears.
≥When you have set this function to “Manual” and turn off and on the FOMA terminal
out of the service area, select a carrier again in the service area.