User's Manual Part 3

509
Appendix/Troubleshooting
The ring tone does not
sound.
≥Make sure Ring Volume is not set to “Silent”.
≥Make sure Public Mode, Manner Mode, and Self
Mode are deactivated.
≥Make sure Call Rejection, Call Acceptance, Call
Setting without ID, Ring Time, and Reject
Unknown are deactivated.
≥Make sure the ring time for Voice Mail Service
and Call Forwarding Service are not set to 0
seconds.
≥Make sure the ring time for Record Message
Setting is not set to 0 seconds.
≥Make sure the ring time for Auto Answer Setting
is not set to 0 seconds.
66
67
108
126
134
135
136
441
444
69
421
“” does not
disappear even if you
move to another place.
≥Turn off and on the FOMA terminal, or remove
and attach/insert the battery pack or UIM.
37
39
43
Cannot make or receive
a call, though the radio
wave conditions are
not bad.
≥Depending on the radio wave property, you may
not be able to make or receive a call even if the
FOMA terminal is “within service area” or “ ”
is displayed as the radio wave condition. Move
to another place and redial.
≥Make sure Call Rejection, Call Acceptance, etc.
are deactivated.
≥Depending on the radio wave congestion state,
calls and mail messages may be congested and
hard to be connected in crowded places. In this
case, the message “Please wait” or “Please wait
for a while” is displayed and a busy tone sounds.
Move to another place or wait for a while, and
then redial.
—
134
—
Problem Countermeasures Reference
Cannot talk.
(Example: “ ” does
not disappear even if
you move to another
place. You cannot
make or receive a call,
though the radio wave
conditions are not bad.)
≥Turn off and on the FOMA terminal, or remove
and attach/insert the battery pack or UIM.
≥Depending on the radio wave property, you may
not be able to make or receive a call even if the
FOMA terminal is “within service area” or “ ”
is displayed as the radio wave condition. Move
to another place and redial.
≥Make sure Call Rejection, Call Acceptance, etc.
are deactivated.
≥Depending on the radio wave congestion state,
calls and mail messages may be congested and
hard to be connected in crowded places. In this
case, the message “Please wait” or “Please wait
for a while” is displayed and a busy tone sounds.
Move to another place or wait for a while, and
then redial.
37
39
43
—
134
—
The phone number for
police station (110) or
fire station (119) does
not disappear.
≥You can clear them by pressing and holding r
for at least one second.
—
The display is dark. ≥You might have changed the brightness of
Backlight. When “Auto setting” is set, the
backlight is adjusted according to the ambient
brightness.
≥Make sure Power Saver Mode is deactivated.
≥Make sure ECO Mode of 1Seg is deactivated.
≥Make sure View Blind is not set to “ON”.
114
113
267
115
The other party’s voice
is difficult to hear or too
loud during a call.
≥You might have changed the earpiece volume.
≥If you change the setting of Shikkari Talk or
Yuttari Talk, the other party’s voice will be more
audible.
65
61
Images or melodies
selected in the
functions are not
played back; they are
played back by the
default setting.
≥Make sure you have inserted the UIM that was
inserted at obtaining images or melodies.
37
Problem Countermeasures Reference