User's Manual Part 3

514
Appendix/Troubleshooting
Error Message (D - I)
Device list is full
No device to overwrite
…The maximum number of Bluetooth devices is stored,
so you cannot store any more. Delete unnecessary
Bluetooth devices. (See page 425)
Downloaded data exists
Cannot connect to network
…Save the PC movie on the PC movie acquisition
completion display, and then close the data acquisition
completion display. (See page 224)
Downloading interrupted
…Another function was running or an error occurred, so
you could not download.
E
Editing now
Cannot delete
…Being used for another function, so you cannot delete.
End the function and try again.
(See page 402)
Enter zoom size
…No magnification is entered. Enter the magnification
and try again. (See page 390)
Enter “+” in right position
…“+” is wrongly positioned. Enter it to the beginning of
the phone number. (See page 58)
Error
…An error occurred, so you could not operate.
Error in image
Does not work correctly
…The Flash movie had an error, so you could not play it
back normally.
F
Failed in transmission
…An error occurred, so you could not perform iC
transmission.
Failed to authenticate
…An authentication error occurred.
Failed to get license file
…Failed to obtain the license information about the PC
movie, so cannot be played back.
Failed to read
…An error occurred while reading information from the
microSD card.
Failed to read
Quitting
…An error occurred when playing back the movie.
…The file cannot be read because you tried to play back
the file in the “Movable contents” folder with a UIM that
was not inserted when that file was saved. Insert the
UIM that was inserted when the file was saved, and try
again. (See page 37)
…The microSD card was removed while reading the
information from it. Insert the microSD card and try
again. (See page 368)
Failed to receive channel info
…Failed to obtain the i-Channel information because part
or all of it could not be obtained.
Failed to save
…An error occurred, so you could not copy the ToruCa
file.
…An error occurred, so you could not save.
…An error occurred, so you could not store.
Failed to send Ir data
…An error occurred, so you could not send the data
using infrared rays.
Failed to set
…An error occurred, so you could not set.
Format error
Insert microSD formatted
…The format of the microSD card is incompatible with
P-02A. Use P-02A to format it. (See page 376)
I
iαppli stand-by display terminated due to security
error
…i-αppli DX has forcibly been ended. (See page 293)
iαppli To function is not set
“iαppli To” function is not set
…A check mark is not put for “Set iαppli To”, so you
cannot start up the i-αppli program. Put a check mark
and try again. (See page 293)
IC card function inactive
Unable to download
…IC card has been locked, so you could not download or
upgrade. Release IC Card Lock and try again.
(See page 316)
Image display is OFF
Cannot download
…“Set image display” is set to “OFF”, so you cannot
obtain the image. Set to “ON” and try again.
(See page 204)
Image in message will be deleted
…The output-prohibited image from the FOMA terminal is
attached to the mail text, so deleted.
i-mode Center is busy
Please try again later (555)
…The line facility has trouble or the line is very busy. Wait
a while and try again.
i-mode mail service is busy
Please try again later (553)
…The line is very busy. Wait a while and try again.
Incomplete data
Unable to start
…The i-αppli program you tried to start up does not start
because partial data only is saved. Download the
whole i-αppli program and try again.
(See page 290)
Input error (205)
…The entered contents are wrong. Check the contents
and try again.
Input too long
…Too many entered characters to send. Decrease the
number of characters and send again.
(See page 192)