User's Manual Part 3

515
Appendix/Troubleshooting
Invalid
Cannot resend
…The address is invalid or the text exceeds the size that
can be entered, so you cannot re-send.
Invalid code
…The entered USSD is incorrect. Enter the correct one.
(See page 456)
Invalid data
…Received data has an error, so cannot be displayed or
saved. The received data is discarded.
…You cannot play back the following PC movies:
・The data files other than Windows Media files or the
files with invalid contents
・The data file whose image size is larger than 800
dots x 480 dots, image bit rate is higher than 2 Mbps,
or voice bit rate is higher than 384 kbps
・If the server returns an unidentified response when
you try to download a savable data file.
・When the streaming server is not supported by the
FOMA terminal (The streaming servers supported by
the FOMA terminal are Windows Media Services 4.1
and Windows Media Services 9 only.)
Invalid data (XXX)
…Received data has an error, so cannot be displayed or
saved. The received data is discarded.
A three-digit numeral is displayed for (XXX).
Invalid data
Data size is not supported (XXX)
…Received data has an error, so cannot be displayed or
saved. The received data is discarded.
A three-digit numeral is displayed for (XXX).
Invalid func in this UIM
…The function cannot be operated from the inserted
UIM.
Invalid ID
…The entered ID is wrong. Enter the correct ID.
(See page 337)
Invalid UIM auto start not display
Invalid UIM
iαppli is unable to run
…You cannot start up the i-αppli program because of the
UIM security function. Insert the UIM which had been
inserted when the i-αppli program was downloaded
and try again. (See page 37)
Invalid UIM
Incorrect display
…The screen memo cannot be correctly displayed
because of the UIM security function. Insert the UIM
that had been inserted when the screen memo was
saved, and try again. (See page 37)
Invalid UIM
Requested service not available
Invalid UIM requested service not available
…You cannot operate because of the UIM security
function. Insert the UIM which had been inserted when
the data or file was obtained and try again.
(See page 37)
Invalid UIM
Requested software failed to start
…You cannot start up the i-αppli program because of the
UIM security function. Insert the UIM which had been
inserted when the data or file was obtained and try
again. (See page 37)
Invalid URL
…The URL is invalid, so you cannot connect to the site or
the Internet web page.
L
Linked page is not downloaded
…The PDF data file has a link but the linked end has not
been downloaded, so the linked page could not be
displayed.
Location provision failed
…An error occurred because the FOMA terminal is out of
the service area or by other reasons, so it failed to
measure the current location or to provide the location
information. Move to a place where radio waves are
strong enough and try again.
M
以下の宛先にはメール送信できませんでした (561)
Mails could not be sent to following address. (561)
●●@△△△.ne.jp
※
…You could not send the mail message correctly to the
displayed address.
※ The mail address differs depending on the destination.
Max cost icon is not displayed
…The Max Cost icon is not displayed, so cannot be
deleted.
Max cost regulation
Cannot dial
…Total Calls has exceeded the maximum cost. Execute
“Reset total cost”. (See page 416)
Memory full
…There is no usable memory space, so you cannot
operate.
Memory function active
Cannot operate
…The microSD card is in use, so you cannot set.
Memory No.：XXX
Cannot overwrite
…You cannot store in the same memory number with the
Phonebook entry stored as secret data. Store in a
different memory number.
A three-digit numeral is displayed for (XXX).
(See page 91)
Error Message (I - M)