User's Manual Part 3

349
Data Management
■The size of still image you can edit
○: Editing picture is enabled. —: Editing picture is disabled.
※1 You cannot edit the still image smaller than 24 x 24 dots.
※2 You cannot edit the still image of Chat Picture (80 x 80) size or smaller.
≥You can edit the still images of 1440 x 1920 dots, 1224 x 1632 dots, 1212 x 1616 dots,
900 x 1600 dots, and 288 x 352 dots as well.
Edit menu
5M, 3M, 2M, 1M,
VGA, QVGA,
QCIF, Sub-QCIF
3.7M Wide,
2M Wide
Stand-by
Other sizes
smaller than
VGA
Marker stamp
○○○○
Frame
○
—
○
—
Character stamp
○○○
○
※1
Fit in screen
○○○○
Change size
○○○○
Trim away
○○○
○
※2
Retouch
○○
—
○
Rotate
○○○○
Brightness
○○○○
Attach to mail
○○○○
Information
≥You can execute “Edit picture” only for the “File unrestricted” files of still images shot
by the cameras, obtained by data communication, downloaded from sites, or retrieved
from i-mode mail.
≥When you select “Edit picture” while playing back a still image whose display direction
is switched, it returns to the original direction.
≥You cannot edit some still images, or you might have difficulty to produce editing
effect.
≥If you repeat editing image, the image quality may deteriorate or the file size may
become larger.
≥You may not be able to edit some still images after their sizes are changed.
≥The file name, title, storage location, and acquired source of the newly saved still
image are as follows:
・File name: “YYYYMMDDhhmmnnnn”
Title: “YYYY/MM/DD hh:mm”
(Y: year, M: month, D: date, h: hour, m: minute, n: number)
・ Storage location: Folder the source file is saved to (Still images on the microSD card
are saved to the “i-mode” folder.)
・Acquired source: The same as the source file
Function Menu of the Edit Picture Display
Information
Marker stamp You can add the marker stamp in the “Stamp” folder.
1Select a marker stamp.
≥You can rotate the marker stamp by pressing i( ) and
selecting “90° to right/90° to left/180°”. Select “Scale up/Scale
down” to enlarge or shrink the marker stamp.
≥You can reselect a marker stamp by pressing l().
1Use Mo to position the marker stamp and press
Oo().
≥You can add a marker stamp by pressing l().
1Oo()
Frame 1Select a frame1Oo()
≥You can add the frame whose size is the same as the size of
the image you are editing.
≥You can display the previous or next frame by pressing No.
Press and hold No for at least one second to display
sequentially.
≥You can rotate the frame by pressing i( ) and
selecting “180° rotation”.
≥You can reselect a frame by pressing l().