User's Manual Part 3

350
Data Management
Character stamp You can add text.
1Enter characters.
You can enter up to 15 full-pitch/30 half-pitch characters.
However, the number of characters you can enter decreases
depending on the size of the still image.
≥Press i( ) and select “Font color” to select a color;
then, you can change the color of characters. You can switch
between “16 Color” and “256 Color” by pressing c().
Select “Font” to change the character fonts.
Select “Font size” to enlarge or shrink characters.
Select “Character input” to edit entered characters.
1Use Mo to position the characters and press Oo()
1Oo()
≥You can reselect a position by pressing l().
Fit in screen You can convert the image size into the Stand-by (480 x 854)
size.
1YES
Change size 1Select an image size to change to.
≥If you select the size different in proportional ratio from the
source still image, the still image is enlarged or shrunk so that it
does not exceed the selected size with its proportional ratio
retained.
1Oo()
≥You can reselect a size by pressing l().
Trim away You can trim the still image to a certain size.
1Select an image size to trim to.
≥You cannot select a trimming frame larger than the still image
you are editing.
≥When you select “Dial/recv. PIC (480 x 288)” or “VGA (480 x
640)”, the still image you are editing and the trimming frame are
halved at both lengthwise and sidewise to be displayed.
1Use Mo to select a part to be trimmed and press
Oo().
≥You can reselect a size to trim by pressing l().
1Oo()
≥You can reselect a part to be trimmed by pressing
l().
Retouch You can set texture and color tone of the still image.
1Select an item.
Sharp . . . . . . . . . . . . . . . . Stresses the outline.
Blur . . . . . . . . . . . . . . . . . . Softens the outline.
Sepia. . . . . . . . . . . . . . . . . Makes the color tone sepia.
Emboss . . . . . . . . . . . . . . Makes the still image rugged.
Negative . . . . . . . . . . . . . . Reverses the color tone.
Horizontal flip . . . . . . . . . Flips the image horizontally.
Super clear shadow . . . . Makes the dark still image clear.
Memory color . . . . . . . . . Corrects the color and contrast.
1Oo()
≥You can reselect an effect by pressing l().
Rotate 190° to right, 90° to left or 180°1Oo()
≥You can reselect the rotation angle by pressing l().
Brightness You can adjust the brightness to -3 (dark) through +3 (bright).
1Select a brightness level.
Attach to mail See page 346.
Save See page 348.
Information
<Marker stamp>
≥You cannot select the marker stamp with following sizes:
・When the size is larger than the still image to be edited
・CIF (288 x 352) ・VGA (480 x 640) ・QVGA (240 x 320)
・QCIF (144 x 176) ・Sub-QCIF (96 x 128)
≥You cannot enlarge a marker stamp to the size larger than the still image you are
editing.
<Character stamp>
≥You cannot set some font colors depending on the image to be edited. In that case,
select another color.