User's Manual Part 3

359
Data Management
The display for selecting Position Memory appears. When you select “Marker to resume”
or “Position memory 1/2”, the video is played back from the stored position.
≥To delete “Position memory”, press i( ) and select “Delete”. You cannot
delete the “Marker to resume”.
≥When the video with a position memory has been deleted, you cannot play it back.
When you select “Position memory” from the Folder list for
videos
Marker to resume This is stored automatically when a call comes in, an alarm
operates, or the battery level goes flat during playback of a video.
Position memory You can store in any optional position in a video, and create up to
two position memories. (See page 360)
Information
≥No sound is output during frame-by-frame playback or during skipping. Further,
captions are not displayed.
≥ Even if you set “Sound effect setting” (or “Sound effect”) to “ON”, effect tones do not
sound during pause, frame-by-frame playback, slow playback, or quick view playback.
≥When you select “YES (default)” from the confirmation display for data broadcasting
while watching a 1Seg program or playing back video, the information on data
broadcasting might be automatically updated, and you might be charged a packet
communication fee. (See page 267)
≥You might not be able to operate links by selecting them on data broadcasting during
pause or at the end of playback.
≥You cannot display data broadcasting on the horizontal display.
≥The part of video that was not correctly recorded owing to the bad radio wave
conditions is not displayed and skipped to the position where it can be displayed
correctly. In that case, the video might not be played back for a few seconds, or might
be distorted. Further, the time bar might not be displayed correctly.
≥If you try to play back a video with a low battery, the battery alert tone sounds, and the
confirmation display appears asking whether to play it back. When the battery
becomes low during playback, the playback pauses, the battery alert tone sounds,
and the confirmation display appears asking whether to end the playback. The battery
alert tone sounds regardless of the setting of “Keypad sound”.
≥If you edit (divide) the video using a mobile phone or personal computer that supports
the edit function, you might not be able to correctly play it back on the FOMA terminal.
≥The protection applied by other devices is not supported.
Function Menu of the Video List
Edit title 1Enter a title.
≥You can enter up to 18 full-pitch/36 half-pitch characters.
Video info You can display the channel name, program name, etc. of the
video.
≥You can display them also by pressing c().
Add desktop icon See page 31.
Reset title You can reset the title to the default.
1YES
Delete
Delete this 1YES
Delete selected You can select multiple videos and delete them.
1Put a check mark for videos to be deleted
1l()1YES
Delete all 1Enter your Terminal Security Code1YES
Memory info You can display the used memory space (estimate).
Listing You can change the displayed contents for Video list.
1Select a display format.
Title . . . . . . . . . . . .The title names are displayed.
Title + image . . . . . The title name and image are displayed at
a time. The displayed image is the first
frame of video.
Information
<Delete>
≥If a call comes in while deleting multiple videos, deleting is canceled.
≥The video whose recording time is long might take a long time to be deleted. Make
sure that the remaining battery is full enough.
≥You might not be able to delete the video containing data that does not support the
FOMA terminal.
<Listing>
≥The video that was not recorded correctly owing to the bad radio wave conditions
might not be played back.