User's Manual Part 3

377
Data Management
You can display the used and unused memory space (estimate) on the
microSD card.
≥See page 347 for checking the used memory space for the still images or movies.
1
m1LifeKit1microSD1Refer microSD data
1i()1microSD info
Information
≥Do not remove the microSD card during Check microSD. Malfunction of the FOMA
terminal or microSD card could result.
≥You cannot execute Check microSD for the unformatted microSD card or
incompatible memory card.
≥When you execute Check microSD, the microSD card may not be recovered
correctly, the data existed before executing Check microSD may be deleted, or the
microSD card itself may be initialized depending on the condition of the microSD card.
≥If you press +l() or -h, or receive a voice call or videophone call during
Check microSD, Check microSD is canceled.
≥If you cancel Check microSD midway, data not recovered may remain. In this case,
try Check microSD again.
≥It may take long to complete Check microSD depending on the data volume stored on
the microSD card.
<microSD Info>
Displaying Capacity of microSD Card
Information
≥As the microSD card contains the system files for the card, the memory space is
smaller than that described on the microSD card even if it contains no data.
By connecting the microSD card to the microSD card adapter, you can
use the microSD card on a personal computer which supports SD card.
The microSD card adapter is available at electronics retail stores, etc.
For installing the microSD card adapter, refer to the instruction manual
for the microSD card adapter.
With a microSD card inserted, connect the FOMA terminal to a personal
computer; then you can read the data from or write the data onto the
microSD card.
The following equipment is required:
≥Connector Cable: FOMA USB Cable with Charge Function 01/02 (option)
≥Personal Computer: Personal computer having the USB port (Universal Serial Bus
Specification Rev 1.1 compliant) that can be connected with the
FOMA USB Cable with Charge Function 01/02 (option)
≥Compatible Operating Systems: Windows 2000, Windows XP, Windows Vista
(Japanese version in each)
1
m1Set./Service1Other settings1USB mode setting
1microSD mode
≥When you set to “microSD mode”, “ ” appears on the Stand-by display.
≥To save WMA files from your personal computer to the microSD card, set to
“MTP mode”. When you set to “MTP mode”, “ ” appears on the Stand-by
display.
≥To use the FOMA terminal for packet communication, 64K data communication,
data sending/receiving (OBEX™ communication), and for calls with USB
Hands-free compatible device, set mode to “Communication mode”.
2
Connect the FOMA terminal to a personal computer
using the FOMA USB Cable with Charge Function 01/02
(option).
The personal computer recognizes the microSD card.
≥“ ” appears on the desktop, and “ ” appears on the Stand-by display.
Also, “ ” is displayed while the microSD card is in the FOMA terminal.
Using a microSD Card with a Personal
Computer
Use FOMA Terminal as microSD Reader/Writer