User's Manual Part 3

335
Map/GPS Function
You can notify a service provider of your current location.
1
m1LifeKit1Map/GPS1Notify of location
1Direct input1Enter a party to be notified1YES
≥You can enter up to 12
digits by using numerals, #
and :.
≥If you have stored LCS
clients by “Reg. LCS client”
beforehand, you can select
an LCS client from “View
service clients”.
≥You can press
l() to stop
measuring, but your current
location might be notified
depending on the timing.
2
OK
<Notify of Location>
Notifying Location Information
Information
≥Even when you send your location information, it might not be delivered to the service
provider depending on the radio wave conditions.
≥You are charged a fee for using the function to notify your current location.
≥To use Notify of Location, you might need to subscribe to a service provider that
supports Notify of Location. Further, you might be charged a fee for using the service.
≥You cannot enter any digits during Keypad Dial Lock.
≥Regardless of the mode of 2in1, your location information is notified by Number A.
≥For using the service, refer to the information on your service provider or the
DOCOMO website.
Up to 50 histories of Position Location, Notify of Location, and Provide
Location are stored.
1
m1LifeKit1Map/GPS
1Location history
1Select a location history.
: Position location
: Provide location
: Notify of location
≥“ ” is displayed for the records of successful positioning.
<Location History>
Displaying History of Checked Location
Information
Information
≥When the location histories exceed 50, they are automatically overwritten from the
oldest one.
≥The location information and accuracy stored in Location History may differ from the
ones sent to the location provision requester or LCS client depending on the radio
wave conditions, and others.
≥When you cancel Position Location midway, fail to measure your location, or reject a
location provision request by the setting of “Location request set.”, the history is not
recorded.
≥Even when the histories of Provide Location or Notify of Location are stored, they
might not have been delivered to your service providers.
≥You cannot use the measuring-failed histories of Provide Location or Notify of
Location for the operations other than “Add to phonebook (except “Store loc. info.”)”,
“Compose message”, “Dialing”, and “Delete”.
≥ When Provide Location was used, the name of the location provision requester is checked
against the Phonebook entries which appear in each mode of 2in1 and then shown.
≥ If the phone number of the location provision requester is the one you added in your
“Own number”, the name of the location provision requester is not displayed on
Location History.
Function Menu while Location History is Displayed
Read map See page 327.
Map/GPS αppli See page 327.
Paste to mail See page 327.