User's Manual Part 3

386
Data Management
You can use the FOMA terminal as a TV remote control by starting the
i-αppli program.
≥To use remote control devices, you may need to download the software program for
those devices. [The pre-installed “Gガイド番組表リモコン (G Guide Program List
Remote control)” supports the infrared remote control function.] The key operation for
the remote control differs depending on the software program.
≥This function does not work with some devices.
≥Communication might be affected by compatible devices and the ambient light.
≥You cannot use the infrared remote control during Self Mode.
≥Turn the FOMA terminal’s Infrared data port to the
front of a device to be operated. You can operate
within about 4 meters away from the device.
≥The radiation angle of the infrared rays is within ±15°
from the center.
For when you forward Phonebook entries using infrared rays, iC
communication, microSD card, or DOCOMO keitai datalink, you can
specify whether to forward the stored still images together.
1
m1Phonebook1Phonebook settings
1Forwarding image1ON or OFF
Using Infrared Remote Control Function
Infrared Remote Control
+m-2-6
<Forwarding Image>
Communication Setting
Within about
4 meters
Infrared data port
Within
±15° from
the center
iC communication is the function that enables you to send/receive data
files to/from another FOMA terminal using the FeliCa reader/writer
function. You can send/receive data files by facing the f mark of your
FOMA terminal toward that of another FOMA terminal supporting the iC
communication function. However, you cannot exchange some files
depending on the other party’s FOMA terminal.
≥ The type of files you can forward and forwarding
conditions are the same as those for infrared
communication. (See page 382) However, you
cannot send multiple files, all Decome-Anime
templates and all data files in Data Box at a time.
≥You cannot execute iC communication while
“IC card lock” is activated.
≥ You might have difficulty in sending or receiving
files depending on the destination FOMA
terminal. In that case, move a f mark close
to or away from the other f mark or move
each side up, down, left, or right.
≥During communication, the FOMA terminal is
placed in the same state as it is out of the service area, so you cannot make/receive
voice calls, videophone calls or PushTalk calls, use packet communication such as
i-mode or mail, or use data communication.
<iC Transmission>
iC Communication Function
f
Face one another’s
f marks.