User's Manual Part 3

336
Map/GPS Function
1
m1LifeKit1Map/GPS1GPS settings
1Do the following operations.
Add to phonebook You can store the location information, phone number, or mail
address in the Phonebook.
1Store loc. info., Store phone number, or Store mail
address1YES
Go to step 2 of “Storing Displayed Phone Number/Mail
Address in Phonebook” on page 93.
Attach to image See page 327.
Compose message You can compose an i-mode mail message to your location
provision requester.
Go to step 3 on page 142.
Dialing See page 246.
Delete
Delete this 1YES
Delete all 1Enter your Terminal Security Code1YES
<GPS Settings>
Setting GPS
Map setting
Select map You can select a GPS compatible i-αppli program to use when
displaying a map from “Map” or location information.
1Select an i-αppli program.
≥See page 201 when you select “Search by i-mode”.
Map activate setting You can set whether to start the GPS compatible i-αppli
program after measuring your current location when
displaying a map.
1Start after locating or Start without locating
GPS button setting You can set a function which is performed after measuring
your location by pressing and holding 1 for at least one
second from the Stand-by display. You can select a function
from the “Function Menu while Current Location is Displayed”
on page 327.
1Select a function.
≥If you set to “Confirm every session”, you can select a
function each time you measure the location.
Posit. tone/illum. See page 337.
Positioning mode You can select a mode for measuring the current location from
either “Standard mode” or “Quality mode”.
When you select “Quality mode”, it takes a longer time to
measure, but the measuring accuracy might be improved as a
result.
You can set a positioning mode for Position Location, Notify of
Location, and Provide Location respectively.
1Select an operation to be set
1Standard mode or Quality mode
Reg. LCS client See page 337.
Location request set. See page 338.
Service settings By connecting to GPS service settings (a host set by “Host
selection”), you can configure the settings for the Provide
Location service such as the permission for location
information search and password.
≥See page 191 for operations while a site is displayed.
However, you cannot use the Bookmark or Screen Memo
function.
Host selection See page 340.