User's Manual Part 3

397
Data Management
1
Watch a 1Seg program while the Flat-plug AV Output
Cable is connected
or
connect the Flat-plug AV Output Cable while watching a
1Seg program.
≥To switch to AV output while the Flat-plug AV Output
Cable is connected, select “Settings” → “Display/
operation” and select “AV output” from the Function
menu.
≥To cancel AV output, pull off the Flat-plug AV Output
Cable away from the FOMA terminal or select
“Settings” → “Display/operation” and select “AV output”
again from the Function menu. When watching 1Seg
programs ends, or when another function starts up, AV
output is canceled.
Information
≥AV output is unavailable for images under Remote Monitoring.
≥The sensitivity of the microphone is improved during AV output.
≥“ ” (Hands-free icon) does not appear during AV output. However, the voice is
output from the connected device. You cannot switch to Hands-free.
Display Video from 1Seg
At 1Seg start-up Released
Information
≥The caption and data broadcasting are not displayed on TV.
≥AV output is unavailable during recording.
≥AV output is unavailable for video or still images recorded by 1Seg.
≥The sound during AV output is output from a connected device, so adjusting the
sound volume of the FOMA terminal cannot change the output sound volume.